MSI BToes 2.0 Bluetooth Radio Revision 476-CI or 587-CI Instructions

Logger Pro 3 only uses the official Microsoft Bluetooth driver software or the WIDCOMM driver. The Microsoft drivers are part of Windows XP SP2.

Do not use any MSI install CD that comes with the radio or go to the MSI web site for drivers; the MSI drivers will not work with Logger Pro.

1. Run Windows Update to fully patch Windows XP SP2. You may need to run Windows Update multiple times until all Critical Updates are installed.
2. Install Logger Pro 3.4.6 or later. You cannot use Logger Pro 3.4.5 with the Rev C radio when using this installation procedure. Update to the current version of Logger Pro 3.
3. Connect the MSI BToes 2.0 revision 476-CI or 587-CI Bluetooth radio.
4. When the first driver is installed, click Finish to allow automatic installation of the remaining drivers.
5. You will see several bubbles like this in the lower right corner of your screen.
   
6. Once you see to bubble shown below, the MSI Bluetooth radio is ready to use.
   

Ready to connect the WDSS to Logger Pro 3? Follow these steps »

• Return to the MSI BToes 2.0 Bluetooth Radio Help »
• Return to the main Bluetooth Help »