Legacy Products

The Universal Lab Interface (ULI) was an interface for collecting data from just about any of our original sensors. It supports all the sensors that the Serial Box can use, plus other sensors such as motion detectors, microphones, radiation monitors, and photogates, and it can sample up to 11,000 readings/second.

We recommend using one of our current interfaces, such as LabQuest and LabPro for better features.

The Serial Box Interface (SBI) was our low-cost computer interface. It was perfect for temperature, pH, pressure, heart rate, dissolved oxygen, and any other analog measurement that can be made fairly slowly (50 readings/s or less).

Our current product for this purpose is Go!Link.

Multi-Purpose Lab Interface (MPLI) can take readings as fast as 75,000 samples/second. It worked with an Apple II, DOS, or Windows-based computer, as long as it has an available ISA slot.

We recommend using one of our current interfaces, such as LabQuest and LabPro for better features.

The original CBL™ (Calculator-Based Lab™) was the first interface for collecting data with a TI Graphing Calculator. It has been replaced by the CBL 2, but we still have sensors, adapters, and programs to use the original CBL to collect data with a TI-73, 82, 83, 83 Plus, 84 Plus, 85, 86, 92, 92 Plus, TI-Nspire in 84 mode, Voyage 200 Graphing Calculator.

Spectro Pro software allows you to collect and analyze data from several different spectrophotometers. The SPECTRONIC 20D or D+, GENESYS 20, or Flinn Spectrophotometer can connect directly to a PC or Macintosh serial port.

Logger Pro 3.4.5 and newer offers spectrometer support for the Vernier Spectrometer and several Ocean Optics™ spectrometers.

Older Software: All of the software you need for data collection in DOS, on an older Macintosh, or the Apple II.

Our Accessories section includes any "extra" stuff you might need: adapters, replacement parts, extension cables, extra power supplies, solutions, etc.