Direct-Connect Temperature Probe
Interface and software sold separately.
The Direct-Connect Temperature Probe is a general-purpose laboratory temperature sensor. It is designed to be used as you would use a thermometer for experiments in chemistry, physics, biology, Earth science, and environmental science.
Description
The Direct-Connect Temperature has a brass tube with a temperature sensor at the end. The tube is covered with Teflon heat-shrink tubing to make it resistant to chemicals. It plugs directly into our ULI, Serial Box, or MPLI interfaces. The temperature range is -15°C to +110°C (±0.2°C in normal use).
Specifications
- Range: –15°C to 110°C
- Linearity: ±0.55 °C
- Resolution:
- 0.07°C (ULI II, Serial Box Interface, or LabPro)
- 0.284°C (ULI or CBL 2)
- Power: 0.15 mA @ 5 VDC
- Response Time (time for a 90% change in reading):
- Water (with stirring): 6 to 8 seconds (typical)
- Moving Air: 30 seconds
Experiments and Lab Ideas
There are currently no experiments available for Direct-Connect Temperature Probe.
Got an idea for an experiment? Please send us your ideas.
What’s Included
- Vernier Direct-Connect Temperature Probe
- User manual
Sensor Requirements
The Direct-Connect Temperature Probe requires a compatible interface and software to collect data. Interface and software sold separately. Getting started with probeware »
Compatible Interfaces
The Direct-Connect Temperature Probe is compatible with these interfaces:
Ordering Information
Educational use only: Vernier products are designed for educational use. They are not appropriate for industrial, medical, or commercial applications. Product usage disclaimer »