The following OHAUS balances can be used to collect data on a computer running Logger Pro 3.13 or newer.

OHAUS Scout® 220 g (OHS-222)
OHAUS Scout® 420 g (OHS-422)
OHAUS Scout® 120 g (OHS-123)

To collect data using one of the OHAUS Scout models above, connect it to the computer using an OHAUS Scout® USB Cable (OHS-USB). Choose New from the File menu in Logger Pro. If it is not immediately recognized (look for the OHAUS icon and live mass readings in the toolbar), choose Connect Interface from the Experiment menu and choose Ohaus. Note that the balance must be running software version Sr. 1.02 or newer.

The following older OHAUS balances can also be used to collect data on a computer running Logger Pro 3.3 or newer.

Scout Pro 0.01 g Balance (200 g) (OHSP-202, discontinued)
Scout Pro 0.01 g Balance (400 g) (OHSP-402, discontinued)
Scout Pro 0.001 g Balance (120 g) (OHSP-123, discontinued)

To collect data with one of the Scout Pro models above, they must be outfitted with the Scout Pro USB Connection Kit (OHSP-USB). After installing the cable on the balance, connect it to the computer and choose New from the File menu in Logger Pro. If it is not immediately recognized (look for the OHAUS icon and live mass readings in the toolbar), choose Connect Interface from the Experiment menu and choose Ohaus. Note that the balance must be running software version Sr. 1.02 or newer..

Some, but not all, of the OHAUS Adventurer and Adventurer Pro series will work with Logger Pro. A standard USB cable is required.

Please note that other models of OHAUS balances probably will not work with Vernier technology.

Which OHAUS balances can I use with Vernier technology?