Vernier Tech Info Library TIL #1425

Voltage Probe Detail Information

Voltage Probe, order code VP-BTA, $12.00
Specifications and User Guide

TROUBLESHOOTING
-Primary Test: Are the red and black leads connected properly and securely?

-Secondary Test: If you suspect that the readings are not correct, try connecting the read and black clips together. The reading should go to zero. If it does not, the wires may be damaged.

PUBLIC TIL ENTRIES
-TIL 1026: The readings from my Current and/or Voltage Probe are erratic, but if I measure the voltage with a multimeter instead, I get a solid reading. What is wrong with my sensor?
-TIL 690: Voltage Probe does not read correctly on LabPro.
-TIL 1076: What is the difference between a Differential Voltage Probe and the simple LabPro voltage probe?
-TIL 1224: What is the input impedance of a LabPro voltage probe?
-TIL 1351: What is the overvoltage protection on the Differential Voltage Probe and Current Probe?
Public List of TIL Entries for VP-BTA

SPECIFICATIONS
No specifications are given for this probe in the sensor booklet.

CALIBRATION
No calibration necessary.

RELATED VERNIER PRODUCTS
-Differential Voltage Probe, order code DVP-BTA, $38.00
- or Current & Voltage Probe System, order code CV-DIN, $0.00

Created by: jrandall on May 07 2005
Last updated by: jhopkins on October 24 2006