Vernier Tech Info Library TIL #1442

UVB Sensor Detail Information

UVB Sensor, order code UVB-BTA, $105.00
Specifications and User Guide

TROUBLESHOOTING
-Primary Test: Are you using the UVB Sensor to check UVA light? Confirm that the sensor is appropriate for the experiment.
-Secondary Test: Take readings outdoors in the sunlight with and without a barrier, such as a sunglasses lens. Confirm that the readings are in the normal range for your area.

PUBLIC TIL ENTRIES
TIL 1137: Do you have UV sensors? How do they work?
TIL 1339: Where can I purchase a UV light source?
TIL 1552: My UVA or UVB sensor is displaying incorrect units in Logger Pro
Public List of TIL Entries for UVB-BTA

SPECIFICATIONS
-new order code: UVB-BTA
-old order code: UVB-DIN
-UV peak sensitivity: one Volt per 204 mW/m2 at 315 nm
-Wavelength sensitivity region, approximate: 290 to 320 nm, half sensitivity points.
-12-bit resolution (LabPro): 0.3 mW/m2
-10-bit resolution (CBL 2, CBL): 1 mW/m2
-Dimensions: 21 cm by 2 cm diameter
-Time response: approximately 2 seconds to reach 95% of final reading

CALIBRATION
-Calibrate? No. The sensor is set to the stored calibration before shipping.
-It is quite difficult to calibrate a UV sensor to read in absolute units, since you must have a source of known UV intensity and spectral distribution. More often you will simply want to calibrate the sensor in terms of a relative intensity. Refer to the detailed instructions for calibration on page 3 of the sensor booklet.

RELATED VERNIER PRODUCTS
UVA Sensor, order code UVA-BTA, $104.00

Created by: jrandall on May 07 2005
Last updated by: jhopkins on June 06 2006