Tech Info Library
The Vernier Tech Info Library contains support documentation for our products, including troubleshooting tips, detailed product specifications, and answers to frequently asked questions from our customers.
115 Tech Info Library Articles for matching "stand"
Do you sell Conductivity Standards?
My turbidity standard bottle is stuck in the Turbidity Sensor. How do I get it out?
Do you sell ISE Standards?
Are you writing a new chemistry lab book for the new 2013 College Board AP standards?
Where can I get replacement Turbidity bottles (cuvettes) or standards?
What are the advantages of using LabQuest with a computer versus as a stand-alone device?
How do I calibrate a COL-DIN Colorimeter using a stand alone LabQuest 2?
Original LabQuest Troubleshooting and FAQs (Full List)
Is your curriculum aligned to NGSS?
Calcium Ion-Selective Electrode Troubleshooting and FAQs
Nitrate Ion-Selective Electrode Troubleshooting and FAQs
Ammonium Ion-Selective Electrode Troubleshooting and FAQs
General tips for using Ion Selective Electrodes (ISE).
Chloride Ion-Selective Electrode Troubleshooting and FAQs
What is the uncertainty of my sensor?
Salinity Sensor Troubleshooting and FAQs
Turbidity Sensor Troubleshooting and FAQs
Does the Vernier Rotational Motion Accessory Kit (AK-RMV) work with the older Rotary Motion Sensors (RMS-BTD or RMS-ULI)?
Where does Logger Pro store experiment files?
Can I use a Go! device with my calculator or my Easy device with a computer?
Conductivity Probe Troubleshooting and FAQs
What is the best way to arrange the Dual Range Force Sensor and PASCO masses on the same dynamics cart?
I found an ORP sensor that was stored dry. How can I test it to see if the electrode is still working?
Will my USB device work with this cable?
What is the difference between LabQuest and LabQuest Mini?
Photogate Troubleshooting and FAQs
I can not connect my ProScope to a dissection scope. What is wrong with my Tube Adapter?
How can I use a Vernier Photogate to measure g?
How can I update to new Vernier equipment and still make use of my old Vernier equipment?
Why Won't my New Instrumentation Amplifier Auto-ID Correctly (Oct 2009 or newer)
Are the device drivers installed correctly? (For Windows with LabPro, original LabQuest and LabQuest Mini)
O2 Gas Sensor Troubleshooting and FAQs
LabQuest 2 FAQs and Troubleshooting
How can I use Vernier products to study muscle activity?
Can I use the Graph Link cable and Logger Pro software on a PC equipped only with USB?
Why does Windows keep reinstalling the LabPro USB drivers for student accounts?
What is the accuracy of a DVP-BTA voltage probe?
What do the numbers on the bottom label of the SpectroVis Plus mean?
CO2 Gas Sensor Troubleshooting and FAQs
Where does Logger Pro install its sample video files on Windows?
Why won't my pH Sensor calibrate?
How is the temperature compensation calculated on the CON-BTA?
What is the the path length for the SpectroVis and the SpectroVis Plus
Why does my Vernier Photogate record a really high velocity at the beginning of a trial with the picket fence?
When installing Logger Pro, I get error 1152.
Mini Gas Chromatograph Plus Gas Chromatograph Troubleshooting and FAQs
What are the software requirements for the Projectile Launcher?
Do I need to use 4-sided clear cuvettes if I am doing a fluorescence experiment with the Spectro VIS Plus?
Does LabQuest replace LabPro?
How can I get high frequencies using PAMP and LabPro?
Are Ethidium Bromide (ETBR) stained gels readable using a BlueView Transilluminator?
Do you have written instructions for experiments that use the Ethanol Sensor?
What is the range on the Ethanol Sensor?
Why are my voltage readings inaccurate when I measure half cells or batteries?
How do I save a custom calibration to my pH sensor?
Why does Logger Pro installer for 3.8.5 complain about "unknown publisher" when I attempt to install?
How do I transfer LabQuest data to Google Sheets?
Do you have silent installers for software other than Logger Pro?
Can I use the original LabQuest with the Connected Science System?
My software does not recognize the Projectile Launcher.
My Stainless Steel Temperature Probe won't fit snugly in a rubber stopper hole.
Is your software compatible with Mac OS X 10.8 Mountain Lion?
How do I transfer data from LabQuest to a computer?
What is the sample volume required by your Chemical Polarimeter?
Digital Radiation Monitor Troubleshooting and FAQs
Can I connect an EasyTemp, EasyLink or CBR 2 directly to a TI-Nspire Lab Cradle?
How do I move a linear fit to make use of error bars?
What do the LED lights on the LabQuest Charging Station signify?
Is there a way to force my bluetooth radio to load the Microsoft driver?
Why are the leads on 30V-BTA so unusual?
How can I put my TI-Nspire Handheld in 84 Mode?
Can I use LabPro with LabVIEW?
How do the Vernier UVA and UVB sensors work?
Do you have a drop counter?
My turbidity cuvette has no line to guide the volume added.
How does the aspect ratio setting on a digital video camera affect video analysis in Logger Pro?
Can you calibrate a Stainless Steel Temperature Probe?
Radiation Monitor Troubleshooting and FAQs
Relative Humidity Sensor Troubleshooting and FAQs
How do I convert a Windows Media Format (.wmv) file for use in Logger Pro 3?
Sound Level Meter Troubleshooting and FAQs
What kind of batteries should I use with LabPro?
What support does Vernier have for Palm OS handhelds? FAQs.
Why am I getting interference when I put two sensors in the same solution?
Can I use the DCU with the CBL 2 or LabPro?
Can I use the PASCO Free Fall Adapter with the ULI, LabPro, or LabQuest?
Can I use my Mac interface on a PC?
How do I prevent my LabPro interfaces from being stolen?
What make and model of computer do you recommend? Should I buy a Mac or a PC?
Where can I find BTA and BTD connectors and sockets?
Does the Pasco ME-6810 Time of Flight Accessory work with ULI, LabPro, and LabQuest?
Can you tell me the difference between the Dual Range Force Sensor and the Student Force Sensor?
Blood Pressure Sensor Troubleshooting and FAQs
Hand Dynamometer Troubleshooting and FAQs
How do we calculate linear fits in Logger Pro?
Why does Logger Pro show only "correlation" when linear is selected, but shows "RMSE" for all other fits?
What does the Force Plate measure?
How do I connect LabQuest to a printer?
How do I use a screen reader like Window Eyes or JAWS with Logger Pro?
Do you sell replacement lids for my cuvettes?
Can I use Vernier BTA sensors with a different A-to-D converter?
I broke the screen on my LabQuest. Can it be repaired?
Should I use a photogate or a Motion Detector?
LabQuest won't connect to Logger Pro.
Can LabVIEW be used with Vernier interfaces?
How do I set up photogates for data collection?
What is the accuracy of the Magnetic Field Sensor?
How should I prepare my Logger Pro installation before creating a disk image?
ORP Sensor Troubleshooting and FAQs
Is it possible to use the Voltage Probe (VP-BTA) when doing an Ohm's Law experiment, or is the Differential Voltage Probe (DVP-BTA) required?
Where can I get calibration solutions for an ORP sensor?
How to get reasonable values for "g" from videos created with a Logitech web camera.
Where are the experiment files for Physics with Computers?
Is Logger Pro integrated with Vernier Data Share or Graphical Analysis for iPad?
Do you have a power supply for electrolysis?
Connected Science System Support
See step-by-step tutorials, guides, videos, and troubleshooting tips for the Connected Science System.Connected Science System Support »
LabQuest Support
General Questions
Logger Pro Support
General Questions
Installation
Warranty and Repair
Warranty and returns information can be found in ordering help.
Ordering and Shipping FAQs
Ordering and shipping information can be found in ordering help.
Training
Vernier offers nationwide workshops, online training, and personalized training. See all training options.
Contact Us
If you were unable to find an answer to your problem or question, contact us toll-free at 1-888-VERNIER during business hours, fill out our support form, or email us at support@vernier.com.