Attention: Safety Recall of Vernier Go Direct Charge Station. Click to learn more.

Vernier myDAQ Adapter

Vernier myDAQ Adapter

Vernier myDAQ Adapter

$69.00

The Vernier myDAQ Adapter allows you to connect Vernier LabQuest® sensors to National Instruments’ myDAQ interface.

ORDER CODE: BT-MDAQ Category
Education Levels
Subjects
Categories

The adapter includes two connectors for Vernier analog sensors and one connector for Vernier digital sensors. A screw terminal and header pins provide access to myDAQ lines not used by the connectors. This includes the two analog output lines, three digital lines (including the digital lines with the frequency and pulse width modulation outputs), and a +5 volt power terminal.

The Vernier myDAQ Adapter board includes an optional external power port. This is designed to be used with Vernier’s LabQuest Power Supply (not included). You might consider using this external power supply if you want an easy way to provide more current to the +5 volt power terminal for building external circuits or to power a servo motor, for example.

What is a NI myDAQ?

NI myDAQ is a low-cost data acquisition (DAQ) device that gives students the ability to measure and analyze live signals anywhere, anytime. NI myDAQ »

Getting Started with LabVIEW and myDAQ

We have created some simple LabVIEW examples to get you started programming your myDAQ with Vernier sensors. LabVIEW for myDAQ Adapter»

Vernier myDAQ Adapter connected to NI myDAQ interface

What's Included

National Instruments myDAQ interface is sold separately.

Accessories

There are no accessories available for this product.

Compatible Sensors

Supported Sensors

Compatibility Notes

  1. This interface can only collect acceleration data from two axes.
  2. You can only read the raw count/raw voltage output by this sensor. You must do the programming to convert to proper sensor units.
  3. Requires advanced programming for data collection
  4. Requires a Motion Detector Cable to connect to a DIG port on the interface
  5. Requires a Heart Rate Receiver to connect to an interface
  6. Use with an electrode such as a pH Sensor, Conductivity Probe, or ORP Sensor.

Support

Warranty

5-year limited warranty
See our warranty policy

Contact Us

Educational use only: Vernier products are designed for educational use. They are not appropriate for industrial, medical, or commercial applications.

SAVE/SHARE YOUR CART