Vernier Software and Technology
Vernier Software & Technology

Getting Started with the Go Direct® Radiation Monitor and LabQuest 2 and LabQuest App

Using Bluetooth

  1. Ensure your Go Direct® Radiation Monitor is charged.
  2. Turn on your sensor by pressing the power button once. The LED on the sensor will flash red.
  3. Ensure your LabQuest is charged or connected to AC power.
  4. Turn on LabQuest and choose New from the File menu.
  5. Choose Wireless Device Setup > Go Direct… from the Sensors menu.
  6. Choose your Go Direct® Radiation Monitor from the list of discovered devices and tap OK. The app will identify the sensor and load a default data-collection setup. The LED on the sensor will now flash green. You are now ready to continue your experiment.

Using USB

  1. Ensure your LabQuest is charged or connected to AC power.
  2. Turn on LabQuest and choose New from the File menu.
  3. Connect the Go Direct® Radiation Monitor to LabQuest. The app will identify the sensor and load a default data-collection setup. You are now ready to continue your experiment.

Compatibility Notes

Wireless connection of this sensor to a LabQuest 2 requires a Go Wireless Bluetooth Adapter when used with some older LabQuest 2 models.

Labquest 2

Need More Assistance?

Contact support by filling out our online support form or call us toll-free at 1-888-837-6437.

Go to top