Infrared Thermometer (IRT-BTA, discontinued)
Specifications and User Guide
TROUBLESHOOTING
– Primary Test: Press the MEAS button on the device. Does it turn on? Point the device at at tabletop or wall. Does it display a reasonable room temperature?
-Secondary Test: Use a thermometer to measure the temperature of a cup of water, and then use the IRT-BTA to measure the temperature of the cup of water. Are the measurements comparable?
SPECIFICATIONS
-order code: IRT-BTA
-Temperature Range: -20 deg C to 400 deg C
-Operating Temperature Range: 0 deg C to 50 deg C at <70% relative humidity
-Display Resolution: 1 deg C
-Accuracy: +/-2% of reading or +/-3 deg C, whichever is greater @ 18 to 28 deg C ambient
operating temperature
-Response Time: 1 s
-Display Resolution on the meter: 1 deg C
-Spectral Response: 6 to 14 micrometers nominal
-Emissivity: preset 0.95
-Detection Element: Thermopile
-Field of View: 65 mm diameter circle at 1000 mm range
-Average Battery Life: 100 hours typical (laser and backlight not illuminated)
CALIBRATION
-Calibrate? No. This sensor is factory calibrated and not designed to be recalibrated.
-Stored Calibration Information
For deg C: slope = -84.388 deg C/V intercept = 398.19 deg C
For deg F: slope = -151.9 deg F/V intercept = 748.74 deg F
For Kelvin: slope = -84.388 K/V intercept = 671.34 K
RELATED VERNIER PRODUCTS
-[product TMP-BTA]
-[product TPL-BTA]
-[product WRT-BTA], (for use with temperature range of -20 to 330 deg C (-4 to 626 deg F))
-[product TCA-BTA], (for use with super-cooled liquids and flame)
-[product STS-BTA], (quick response - for use in air only)
-[product GO-TEMP], (direct USB connection to computers or labQuest)
[til 2918]
[til 3778]