This article refers to the Inductor (IND). It also applies to the inductor installed on the Vernier Circuit Board 2 (VCB2).

The resistance of the coil is less than 5 Ω.
The inductor is rated at 200 W.
The wire is 24 gauge copper wire.
The effective parallel winding capacitance is 30.8 pf.
The self resonance frequency is 403 KHz.
The diameter of the hole in the center is 13.1 mm (0.520 inch).
The nominal inductance is 5 mH.

Above the self resonance frequency (f_res) it will look like a capacitor instead of an inductor.
Generally, below (f_res)/10 (40 KHz in this case) the capacitance is negligible.

At 10 KHz the Q is 32(due to the 4.22 ohms of resistance in the tested sample)