The information that follows is for LabQuest Viewer software for Windows® and Macintosh® computers. If you are looking for information about the LabQuest Viewer App for iPad®, see
LabQuest Viewer App for iPad Troubleshooting and FAQs

LabQuest Viewer® (LQ-VIEW)
LabQuest Viewer® (LQ-VIEW-E)

System Requirements
What are the system requirements for LabQuest Viewer?

General Troubleshooting Steps
If LabQuest Viewer is not able to connect to the LabQuest or shows a blank list* of available LabQuest devices, try these steps:

1. Make sure the LabQuest is powered on and connected to the same network as the computer. (Depending on how your network is configured, devices on one WiFi network may not be allowed to communicate with devices on another network.)

2. Verify that LabQuest Viewer is enabled.
     For LabQuest 3
     a. Tap the Connections App from the Settings screen.
     b. Tap the Viewer icon, .
     c. Make sure the Viewer is set to “On”.

     For LabQuest 2
     a. Tap the Wi-Fi icon on the LabQuest 2 toolbar.
     b. Tap the Viewer gear icon.
     c. Make sure the Viewer is set to “On”.

     For original LabQuest
     a. Tap the Home icon on the original LabQuest toolbar.
     b. Tap Control Panel > Viewer Setup.
     c. Make sure the Viewer is set to “On”.

3. Use the refresh button to refresh the list.

4. Manually enter the LabQuest IP address into the Viewer software.
     a. Tap the Wi-Fi icon on the LabQuest toolbar and note the IP address of the LabQuest.
     b. On the computer, tap the Gear icon to access the My Lab Setup screen.
     c. Under the Manually add section, enter the IP address of the LabQuest, then tap the + icon.

Note: If manually entering the IP address works, your network is probably blocking Bonjour traffic. Contact your IT department.

5. If the Wi-Fi network connection does not work, you can use the LabQuest Viewer software with a LabQuest 2 or LabQuest 3 that is connected via USB. Note: This connection type does not work with an original LabQuest.

When the LabQuest 2 or LabQuest 3 is connected to the computer with a USB cable, the connection is not dependent on network settings. In general, the USB connection is very reliable. For detailed instruction, see
How do I connect a LabQuest to LabQuest Viewer via USB?

Note: In order to use LabQuest with Logger Pro or Graphical Analysis 4, you will need to disable the “Enable Viewer over USB” option on your LabQuest 2 or LabQuest 3.

*LabQuest Viewer uses Bonjour® software for network device discovery. Changes to your computer’s network settings will reset Bonjour discovery software. The software can take several minutes to regenerate the list of available devices.

Related Information
How do I project the LabQuest screen?
LabQuest Viewer Sources list shows my LabQuest after it is turned off.
How do I access LabQuest Viewer installers and password from my account on the Vernier website?
How do I take a screen shot of my LabQuest 2 or LabQuest 3 screen?
Can I use the modify or repair options from the LabQuest Viewer Windows installer to reinstall Bonjour?
Why is the wrong name for my LabQuest displayed in the LabQuest Viewer Sources list?
When LabQuest Viewer tries to connect to a LabQuest, it always asks for a password.
Why does LabQuest Viewer 2.0 prompt me about Microsoft .NET Framework on my Windows 7 computer?
Why doesn't LabQuest Viewer 2.0 install on a Windows 7 computer?
What are the wireless capabilities of the original LabQuest?
LabQuest 2 FAQs

LabQuest Viewer v1.1 specific issues
Why does LabQuest Viewer (v1.1) on Windows XP not show both LabQuest name/IP address when manually added?
How can I view multiple LabQuests at the same time using LabQuest Viewer version 1.1?
LabQuest Viewer v1.1 does not install on computers running Windows Vista SP1

LabQuest Viewer v1.0 specific issues
Is LabQuest Viewer software compatible with Mac OS X 10.9 (Mavericks) or 10.10 (Yosemite)?

For questions regarding the LabQuest Emulator, see
What is the difference between LabQuest Emulator and LabQuest Viewer?
LabQuest Emulator Troubleshooting and FAQs
Do you offer a Mac-compatible LabQuest Emulator?