...Vernier Circuit Board can be done with the Vernier Circuit Board 2, with no change to the instructions, since the pin numbers are the same. The Vernier Circuit Board 2......
Tech Support Search
Vernier Circuit Board 2 (VCB2) Specifications and User Guide This article is about the Vernier Circuit Board 2, introduced in late 2015. Information about the original Vernier Circuit Board can......
...do I get replacement lamps for the Vernier Circuit Board (VCB)? Is there a better resolution schematic for the Vernier Circuit board than what is in the guidebook? See all......
There are two different lamps provided with our Vernier Circuit Board 2 (VCB2). The Vernier Circuit Board 2 comes with 5 cylindrical bulbs (#48), 2.0 V, 60 mA. It also......
Yes, resonance in RLC circuits can be investigated with either the Vernier Circuit Board (discontinued)or the Vernier Circuit Board 2 (VCB2). If using the Vernier Circuit Board, an inductor such......
...remove the dead battery. Press the new battery connector down onto the associated pin connector located on the circuit board. Wrap the wires around the edge of the circuit board......
In April of 2018, it was determined that switches SW1 and SW4 pose a safety hazard. Affected products: All Vernier Circuit Board 2 (VCB2), shipped prior to April 11, 2018......
...down onto the associated pin connector located on the circuit board. Wrap the wires around the edge of the circuit board as shown. Carefully slide the circuit board into the......
...circuit board. Carefully slide the circuit board into the probe housing. Verify wires are wrapped around the edge of the circuit board, as shown below. Place the end cap onto......