This process will load the 6.27 version of the LabPro operating system onto your interface. It will also load the most recent DataMate programs. What......
To manually set up a nonauto-ID sensor in DataMate perform the following steps: 1) Connect the sensor to channel CH 1 on the LabPro or......
After upgrading the LabPro with Logger Pro 3.1 or 3.2, if you start the DataMate application and do not use the [CLEAR] button on the......
Some of the Vernier data-collection applications for the TI-83 Plus and TI-84 Plus calculators make use of the calculator’s system variables (lists, matrices, real numbers,......
The -999.9 appears because power was lost to the interface at some time after the sensor was set up. When that happened, the sensor calibration......
The number of data points that you can collect depends upon the calculator, the number and type of sensors, and the available calculator memory. The......
The TI-82 will automatically recognize the Vernier auto-ID sensors and load appropriate calibrations. When you plug in the auto-ID sensor, you will see the “checking......
The issue is probably a conflict with the new version of DataMate and the calculator operating system (OS). Your calculator needs to be running the......
A Zip file containing generic screen shots from the DataMate software is available through the link below. http://www2.vernier.com/download/datamatescreens.zip When you extract the contents of the......