If an incorrect calibration is stored in the Go Direct sensor’s memory, it can get stuck at reading the same value (usually zero) all the......
It is possible that there is a real problem, but first check for this: The default sensor setting for the is Motion. There are two......
The includes two thumb screws and a permanently attached pin. To attach it to the Vernier Dynamics System track, follow these steps: Remove the thumb......
Specifications and User Guide TROUBLESHOOTING – Primary Test: Press the power button on the sensor to turn it on. (The red LED will flash.) Start......
In most cases, calibration is unnecessary. Only the Go Direct Motion Detector can be calibrated for better accuracy, by using the Motion channel and performing......
Ultrasonic motion detectors only measure the position of an object that is directly in front of it, within about 3 meters (10 feet). It is......