The Water Depth Sampler is used to collect water samples at different depths in a body of water. The sampler is made of a PVC......
The short answer is yes. A little construction is required to create a platform to connect the Test Wall to the Vernier Structures and Materials......
Specifications and User Guide TROUBLESHOOTING – Primary Test: The VSMT Force sensor will auto-ID with supported releases of software. – Secondary Test: The VSMT Displacement......
Yes. Using the tackle provided with the Structures & Materials Testers you can apply a load to a beam in a 3-point and 4-point test.......
Yes. The force sensor will auto-ID when using Logger Lite. If you are using only the force sensor, you are ready to go after starting......
The experiment file named “Structures Comparison” (found in the Probes SensorsStructures and Materials Tester) requires two mass values to be entered into Logger Pro data......
If the force sensor in your needs to be repaired or replaced, it can be removed from the device with a few simple steps. Removing......
Teachers and instructors who purchase Vernier lab books have permission through the site license to reproduce our content for use by students at their school.......
The force sensor (aka load cell) reading is affected by minor variations in motion affecting the connection between the sensor and the structure, as well......
Yes. This can be done, but it does require some special setup. The has an analog force sensor and a digital displacement sensor which are......