Posts tagged with: Ohaus

The following OHAUS Scout balances can be used to collect data using an original LabQuest (v 1.7.5 or newer), LabQuest 2 (v 2.7.2 or newer),......
Continue Reading →
Only certain OHAUS balances are supported by Logger Pro 3. See for a list of specific models and the required USB cables. Is your balance......
Continue Reading →
OHAUS Troubleshooting 1. Connect an OHAUS balance using the appropriate USB cable. 2. Launch the software and choose New from the File menu. The balance......
Continue Reading →
The following OHAUS balances can be used to collect data with a LabQuest. To collect data using the OHAUS Scout models above, they must be......
Continue Reading →
There are a number of items to check, in this order, before we conclude the balance needs to be returned for repair/replacement. After completing each......
Continue Reading →
It will work; however, you must use the TARE key instead of the ZERO key. The TARE key is available on the following OHAUS Scout......
Continue Reading →
If the number of decimal places displayed in the software does not match the display on the balance, you can change them by doing the......
Continue Reading →
There is an intermittent timing related issue when first connecting an Ohaus balance, VGPS, or Watts Up device to Windows 8 32 bit operating systems......
Continue Reading →
64 bit operating systems are best supported in Logger Pro 3.8.3 or newer. If you have an older version of Logger Pro 3, the update......
Continue Reading →
The Ohaus balances are limited in sample rate because of the design architecture of the balances. They are built to be very accurate, but were......
Continue Reading →