Posts tagged with: USB

Only certain OHAUS balances are supported by Logger Pro 3. See for a list of specific models and the required USB cables. Is your balance......
Continue Reading →
There are a couple of key steps you have to take to connect your Go Direct sensors to a Linux operating system. 1) Install the......
Continue Reading →
Here are a few things to check: 1. Ensure you have compatible versions of the software installed using our installer. The minimum version of Logger......
Continue Reading →
The LabQuest Emulator will not be able to communicate with a LabQuest over USB if a newer USB device driver has been installed by another......
Continue Reading →
Graphical Analysis 4 will collect data from LabQuest 2, LabQuest Mini, LabQuest Stream, and the original LabQuest when connected to a Chromebook via USB connection.......
Continue Reading →
If you are in an area where Wi-Fi is unavailable or unreliable, it is possible to use LabQuest Viewer to connect to LabQuest 2 via......
Continue Reading →
OHAUS Troubleshooting 1. Connect an OHAUS balance using the appropriate USB cable. 2. Launch the software and choose New from the File menu. The balance......
Continue Reading →
In rare cases, a SpectroVis Plus or Go Direct SpectroVis Plus may lock up when used on a LabQuest 2, it may not be recognized,......
Continue Reading →
Some micro USB cables are made only for charging devices and are not wired for communication. These are often included in electronic devices that are......
Continue Reading →
We support HP printers connected via USB cable on the original LabQuest and LabQuest 2; from the original LabQuest via the Vernier Wi-Fi USB adapter......
Continue Reading →