Go Direct Voltage Probe Troubleshooting and FAQsDecember 31, 20190 Specifications and User Guide TROUBLESHOOTING When using Go Direct Voltage to measure electric potential, check the following: Are the leads properly and securely connected? The...... Continue Reading →
If a lab activity is written for a Vernier Energy Sensor and I don’t have one, can I still do the lab?January 3, 20190 Experiments that are written for the or the can be performed with standalone voltage and current probes, but you will need to set up the...... Continue Reading →
Is it possible to use the Voltage Probe (VP-BTA) when doing an Ohm’s Law experiment, or is the Differential Voltage Probe (DVP-BTA) or Go Direct Voltage Probe (GDX-VOLT) required?February 8, 20170 You can use the standard , to do Ohm’s Law experiments. There are two things you need to watch out for, and for these reasons...... Continue Reading →
What is the difference between a Differential Voltage Probe (DVP-BTA) or Go Direct Voltage Probe (GDX-VOLT) and the simple Voltage Probe (VP-BTA)?February 8, 20170 The key difference is that the black leads on the simple Voltage Probe (VP-BTA) are connected to ground of the interface when used. That means...... Continue Reading →