{"id":21726,"date":"2024-08-08T11:52:54","date_gmt":"2024-08-08T18:52:54","guid":{"rendered":"https:\/\/www.vernier.com\/til\/?page_id=21726"},"modified":"2026-03-26T13:39:10","modified_gmt":"2026-03-26T20:39:10","slug":"labquest","status":"publish","type":"page","link":"https:\/\/www.vernier.com\/til\/get-started\/labquest-sensors\/labquest","title":{"rendered":"Using LabQuest Sensors with LabQuest"},"content":{"rendered":"

Update Your LabQuest<\/h2>\n
\n
\n

Our LabQuest interfaces have a built-in application for data-collection and analysis. Please update your LabQuest to the latest version for optimal sensor compatibility and functionality.<\/p>\n

\n
LabQuest 3 Update<\/a><\/div>\n
LabQuest 2 Update<\/a><\/div>\n<\/div>\n<\/div>\n<\/div>\n

Connect Your Sensor<\/h2>\n
    \n
  1. Ensure your LabQuest is charged or connected to AC power.<\/li>\n
  2. Turn on LabQuest and choose New<\/strong> from the File menu.<\/li>\n
  3. Connect the sensor to LabQuest.<\/li>\n
  4. The app will identify the sensor and load a default data-collection setup. You are now ready to continue your experiment.<\/li>\n<\/ol>\n
    \n
    \n
    \n
    \"\"
    LabQuest 3<\/small><\/strong><\/figcaption><\/figure>\n<\/div>\n<\/div>\n
    \n
    \n
    \"\"
    LabQuest 2<\/small><\/strong><\/figcaption><\/figure>\n<\/div>\n<\/div>\n<\/div>\n

    Data Share Your Sensor Data Using Wi-Fi and LabQuest 3<\/h2>\n

    Data Sharing lets you stream data collected on a LabQuest 3<\/a> (or LabQuest 2) to multiple devices that are running Graphical Analysis<\/a>. Your LabQuest must be on the same Wi-Fi network as your devices. Note:<\/strong> This option does not work for Graphical Analysis run in a browser.<\/em><\/p>\n

    LabQuest cannot receive data via Data Sharing, it can only act as a Data Sharing source.<\/p>\n

      \n
    1. Ensure your LabQuest is charged or connected to AC power.<\/li>\n
    2. Turn on LabQuest and choose New<\/strong> from the File menu.<\/li>\n
    3. Connect the sensor to your LabQuest. The app will identify the sensor and load a default data-collection setup.<\/li>\n
    4. Enable Data Sharing<\/a> on LabQuest.<\/li>\n
    5. Launch Graphical Analysis on the device you wish to Data Share with.<\/li>\n
    6. Click or tap \"\".<\/li>\n
    7. Choose your LabQuest from the list of discovered Data Sharing sources.\n