New Features<\/b>
\n\u2022New Sensor Support
\n \u2022\tVernier Motion Encoder System
\n \u2022\tPAR Sensor
\n \u2022\tEmissions Spectrometer
\n \u2022\tUV-VIS Spectrometer
\n\u2022\tImplemented an option in Selected Events mode to collect and plot sensor data vs. time. The time reported is the time elapsed since data collection started.
\n\u2022\tChanged the method used to average an analog sensor\u2019s meter values to better filter electronic noise.
\n \u2022\tThis change is not applied when sensors of other types (internal, digital, wireless or USB) are used in conjunction with analog sensors.
\n \u2022\tCollected data is not affected by this change.
\n\u2022\tAdded an analog meter option on the meter screen.
\n\u2022\tAdded Integral function to calculated columns.
\n\u2022\tUpdated the CO2 calibration.
\n\u2022\tImplemented the ability to set up and save a Data Matrix file without having to collect any data.
\n\u2022\tImproved automatic saving of files to prevent file corruption when battery becomes critical.
\n\u2022\tMinimized the risk of corrupting the DAQ software install during an update.
\n\u2022\tAdded language support for Hebrew.<\/p>\n
Vernier Data Share Web App (v1.3)<\/b>
\nVernier Data Share is part of the Connected Science System and allows students to view, analyze, and annotate data collected with LabQuest 2 on mobile devices such as iPad and other iOS devices, Android phones and tablets, Chromebooks, and laptops. The Data Share version 1.3 update includes:
\n\u2022\tSupport for Internet Explorer 10
\n\u2022\tImproved support for Firefox
\n\u2022\tData Columns presented in the same order they appear on LabQuest 2
\n\u2022\tRecognition of lengthy LabQuest App calculations to avoid treatment as a lost connection.
\n\u2022\tBetter support for automatic graph range changes originated from LabQuest (e.g. changing units)<\/p>\n
Resolved Issues<\/b>
\n\u2022\tSynced the two Wi-Fi On\/Off toggles in the Connections app.
\n\u2022\tManually plotted y-axis column was not plotted after a File \u2013 New.
\n\u2022\tThe LabQuest App would crash while collecting data in Data Matrix mode when a sensor that uses a default mode other than time graph was connected. (Drop Counter, Spectrometer, etc.)
\n\u2022\tImproved email to support more email server configurations.
\n\u2022\tFixed 2.2 known issues:
\n \u2022\tIf the update USB drive or SD card does not have enough memory (~5 kB) to store the updated log during the update, the user will be warned.
\n \u2022\tAdvanced preference lockdown-mode now only allows values to 0, 1 or 2 instead of any integer.<\/p>\n
LabQuest 2.2.1 Known Issues<\/b>
\n\u2022\tWeb App v1.3 is not fully supported when used with devices running iOS 7.
\n \u2022\tiPad: does not save image to camera roll.
\n \u2022\tiPod and iPhone: No access to Source, View and other web app tools when viewed in Landscape.<\/p>\n