Shop
Search
- Can you trigger a photogate with a green laser? - Technical ...
- We have tested this with the Green Diffraction Laser (GDL-DAK) and it effectively activates the photogate's photo-transistor. A Class 2 laser is generally ...
- https://www.vernier.com/til/4135
- Diffraction Apparatus Troubleshooting and FAQs - Technical ...
- Set the laser to pass through the 0.04 mm single slit. ... The Red Diffraction Laser and Green Diffraction Laser are both Class 2 laser products.
- https://www.vernier.com/til/2995
- What is the tolerance on the slits and lasers of the Diffraction ...
- The tolerance of slit widths and separations is 3-4 microns. The laser wavelengths are. green 532 +/- 1 nm red 635 +/- 5 nm. Both lasers are Class 2 laser ...
- https://www.vernier.com/til/2947
- Does Vernier have any labs that relate to climate change?
- Yes. In November of 2010, Dave Vernier attended a conference at West Point Academy and learned that West Point had already been using Vernier sensors...
- http://www.vernier.com/til/2307/
- Why does my Vernier Photogate (VPG-BTD) not respond to block/unblock events?
- Check the position of the sliding shutter on the inside of the photogate. Since the shutter is black, it is easy to miss its position....
- http://www.vernier.com/til/1360/
- Can I use Go Direct Acceleration with a metal cart?
- Yes, you can attach our to the green, metal carts from the using the gray, plastic bracket (A) that came with the accelerometer and the...
- http://www.vernier.com/til/4300/
- My original LabQuest is stuck on a plain screen displaying "Vernier" text.
- This information pertains to the original LabQuest. If you have LabQuest 2, see this article. If you have LabQuest 3, see this article. If your...
- http://www.vernier.com/til/2527/
- Optics Expansion Kit Troubleshooting and FAQs
- Specifications and User Guide Center thickness of the three lenses included in the Optics Expansion Kit: 10 cm convex – 8.3mm 20 cm convex –...
- http://www.vernier.com/til/2948/
- Thermal Analysis does not detect the FLIR ONE camera
- If you connect the FLIR ONE camera to your device, turn on the camera, and then open the Thermal Analysis app, sometimes the app does...
- http://www.vernier.com/til/3699/
- Which printers are supported in LabQuest?
- LabQuest 3 LabQuest 3 can print to IPP-enabled network printers. IPP, which stands for Internet Printing Protocol, is available on most printers manufactured after 2018....
- http://www.vernier.com/til/1659/
- What do the 650 nm, 550 nm, and 450 nm channels measure in the Go Direct Light and Color sensor?
- The values 650 nm, 550 nm, and 450 nm refer to the peak wavelengths of visible light to which the color sensors respond. These wavelengths...
- http://www.vernier.com/til/4025/
- How can I use probeware to investigate the science of a green roof?
- Below are links to experiments with various aspects you could investigate in conjunction with the green roof project. Some of these have been done by...
- http://www.vernier.com/til/3725/
- What equipment do I need to study wind energy?
- The equipment you need to study wind energy in a classroom depends on the grade level and what activities you are interested in doing. A...
- http://www.vernier.com/til/2875/
- How do I print to the HP LaserJet Pro 400 M401n,dn,dne,dw printers?
- This information pertains to the original LabQuest and LabQuest 2. If you have a LabQuest 2, see this article. Before following these instructions to add...
- http://www.vernier.com/til/3010/
- Can I use solar power or an external battery pack to power LabQuest?
- We recommend the , a rechargeable external battery designed for our LabQuest platforms. This includes charging cables not available from Voltaic directly. There are also...
- http://www.vernier.com/til/2194/
- Does LabQuest print to the HP LaserJet P1606dn?
- This information pertains to the original LabQuest and LabQuest 2. If you have a LabQuest 3, see this article. In order to get the Laserjet...
- http://www.vernier.com/til/2563/
- Will LabQuest print to the HP LaserJet P2035/P2035n?
- This information pertains to the original LabQuest and LabQuest 2. If you have a LabQuest 3, see this article. Before following these instructions to add...
- http://www.vernier.com/til/2559/
- Does the Pasco Laser Switch (ME-9259A) work with Vernier interfaces?
- Yes. If you use the , the ME-9259A will work with LabPro.
- http://www.vernier.com/til/1980/
Green Diffraction Laser
SAVE/SHARE YOUR CART