Vernier LabQuest 3 is a standalone interface used to collect sensor data with its built-in graphing and analysis application. This update was released July 25, 2023. Download the update to add new features and enhancements for LabQuest 3.
New Features and Enhancements
Adjusted power saving profiles to allow the screen to stay on longer.
Added a new Always On power profile.
Added support for revised sensors―Go!Motion/CBR2 connected via USB.
This update method is required for a LabQuest unit running version 3.0.2 or newer.
Make sure your LabQuest is connected to a Wi-Fi network that has internet connectivity.
Launch the Update app from the Settings screen. This initiates an update check.
If an update is available, the Update button becomes active. Tap the Update button to download and apply the update. The update starts automatically once the download is complete.
Using a USB Flash Drive
Download the SWU update file above to the root directory of a USB flash drive.
Connect the USB drive to the LabQuest unit. When the update file is found, the Update app launches.
If the update is a newer than the one currently running on your LabQuest, the Update button will become active. Tap the Update button to start the update. Do not disconnect the USB flash drive until the update is complete.