Did you mean "Go Direct Regular; Potassium Ion-Selective Electrode BNC"

1. • Data Collection with Go Wireless pH/Electrode Amplifier FAQs
   • Data Collection with Go Wireless pH/Electrode Amplifier FAQs Q: What are the steps to start data collection with a Go Wireless pH? A: Follow the...
   • https://www.vernier.com/til/3375/
2. • Can I use a Vernier Ion-Selective Electrode (ISE) with Arduino?
   • Yes, it is possible to use a Vernier Ion-Selective Electrode (ISE) with an Arduino microcontroller. However, we do not recommend this combination unless you are...
   • https://www.vernier.com/til/3635/
3. • Potassium Ion-Selective Electrode Troubleshooting and FAQs
   • Specifications and User Guide Troubleshooting Additional Troubleshooting Specifications Calibration Calibrate? Yes. Conduct a two-point calibration, using the standard solutions that are shipped with the sensor....
   • https://www.vernier.com/til/3115/
4. • Electrode Amplifier Troubleshooting and FAQs
   • Specifications and User Guide Troubleshooting Additional Troubleshooting Specifications Calibration Calibrate? Normally, yes. However, it depends on the electrode that is connected. The Electrode Amplifier amplifies...
   • https://www.vernier.com/til/1430/
5. • Go Direct Potassium Ion-Selective Electrode Troubleshooting and FAQs
   • Specifications and User Guide Troubleshooting General: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting...
   • https://www.vernier.com/til/4347/
6. • Can salinity be measured using a chloride ion-selective electrode?
   • Yes, salinity can be calculated from the chloride ion concentration using or using the following equation:           salinity (ppt) = 0.0018066 x Cl– (mg/L)* This equation...
   • https://www.vernier.com/til/4323/
7. • General tips for using Ion Selective Electrodes (ISE).
   • Ion-Selective Electrodes require careful use. The following are some general tips to keep in mind that will supplement the information found in the probe booklet...
   • https://www.vernier.com/til/665/
8. • How can I have my ISE read mV output instead of mg/L?
   • For Go Direct ISEs (order codes begin with GDX-), simply enable the sensor’s mV channel in the app. For most LabQuest ISEs (order codes end...
   • https://www.vernier.com/til/1296/
9. • Can I use my third-party ISE with my Vernier equipment?
   • Maybe. The answer to this depends on a couple of things. 1. Does your electrode have a BNC connector? If so, you can use it...
   • https://www.vernier.com/til/2291/
10. • Go Direct Chloride Ion-Selective Electrode Troubleshooting and FAQs
    • Specifications and User Guide Troubleshooting General: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting...
    • https://www.vernier.com/til/4350/