51 results for "Goggles Set of 2"

• How do I remove a broken capillary tube from a Melt ...

  Wear safety glasses or safety goggles. 1. Turn off the Melt Station and allow it to cool to room temperature. Unplug the power cord from the device. 2. Place the Melt Station unit on its back side so the capillary tube slots are as close to horizontal as possible. This will make it easier to safely remove the glass shards. 3.

  https://www.vernier.com/til/3899/

• How do I set up LabQuest 3 to email data with a Gmail account?

  This information pertains to LabQuest 3. If you have a LabQuest 2, see this article. The original LabQuest does not support this feature. To set...

  http://www.vernier.com/til/8735/

• Why does my brand new LabQuest 3 battery not work?

  This information pertains to LabQuest 3. If you have a LabQuest 2, see this article. If you have an original LabQuest, see this article. To...

  http://www.vernier.com/til/8725/

• Do you have support for LabVIEW 2020?

  We provide LabVIEW support for many of our products. In some cases you will download our LabVIEW files and place them in your LabVIEW directory,...

  http://www.vernier.com/til/7636/

• How do you press the Keep button, during data collection, using Talking LabQuest 2?

  After talking with the people at Independence Science, we do not think there is a way to activate the Keep button, during Events with Entry...

  http://www.vernier.com/til/6523/

• How can I extend the useful life of my Vernier oxygen gas sensor?

  The useful life of Vernier oxygen gas sensors is dependent on how they are stored and how much oxygen they are exposed to over a...

  http://www.vernier.com/til/2588/

• Mini GC Plus Gas Chromatograph Troubleshooting and FAQs

  These specifications are for the Specifications and User Guide If you have the original Mini GC, the specifications are listed here: Specifications and User Guide...

  http://www.vernier.com/til/2841/

• My LabQuest 2 asks for a Linux login. What should I do?

  If this is what you see (in white or pale blue font) when you are updating your LabQuest 2 or turning it on: OpenedHand Linux...

  http://www.vernier.com/til/3051/

• LabQuest 2.6.2, 2.6.1 and 2.6 Release Notes

  LabQuest 2.6.2 • Improved system stability with networking LabQuest 2.6.1 • Improved system stability after reboot LabQuest 2.6 New Sensor Support • Platinum-Cell Conductivity Probe...

  http://www.vernier.com/til/3521/

• LabQuest 2.5.3 and 2.5 Release Notes

  LabQuest 2.5.3 • Addressed an issue related to the data acquisition (DAQ) software LabQuest 2.5 New Sensor Support • Vernier Structures & Materials Tester •...

  http://www.vernier.com/til/3373/

• Go Wireless Sensors - LabQuest Support Details

  LabQuest support for Go Wireless sensors FAQs Q: What LabQuest units can collect Go Wireless sensor data? A: LabQuest 2 and LabQuest 3. However, some...

  http://www.vernier.com/til/3134/

• How do I know if my LabQuest will work with Go Direct Sensors and Go Wireless devices?

  Only the , connected via USB can be used with the original LabQuest. All other Go Direct sensors are not supported. All models of LabQuest...

  http://www.vernier.com/til/3085/

• Are your apps supported in macOS 10.15 Catalina?

  macOS® 10.15 (also called Catalina) was released October 7, 2019. Logger Pro 3.16 is fully supported with the exception of video capture. Video analysis is...

  http://www.vernier.com/til/4441/

• How do I tell which model Go!Link I have?

  The Go!Link originally came out in 2004. As time went on some of the components we were using in the original design were no longer...

  http://www.vernier.com/til/4389/

• Problems with force sensor giving bad readings because hex barrel has been removed and improperly reinstalled.

  This article refers to the following products: All three of these sensors have a hexagonal barrel, or standoff, extending from the sensor case. This part...

  http://www.vernier.com/til/2149/

• Do you have support for LabVIEW 2019?

  We provide LabVIEW support for many of our products. In some cases you will download our LabVIEW files and place them in your LabVIEW directory,...

  http://www.vernier.com/til/4494/

• macOS is warning me that Logger Pro is not 64 bit and therefore won't run on 10.15 Catalina

  If you are specifically seeing messages about Logger Pro not being 64 bit, that means you are running an older version of Logger Pro, and...

  http://www.vernier.com/til/4495/

• macOS gives a message on launch of Logger Pro that "Logger Pro has not been optimized for your Mac"

  Logger Pro 3.15 and earlier will generate an error message on computers running macOS 10.14.4 and later. The full text of the error message is...

  http://www.vernier.com/til/4386/

• Is there a user guide for Logger Pro 3?

  There are several ways to get help using Logger Pro 3. First, on our Product Manuals page, there is a quick start guide: http://www2.vernier.com/manuals/LP3QuickRefManual.pdf In...

  http://www.vernier.com/til/1207/

• How can I set the time of the first frame used for video analysis to zero?

  By default, time zero on the video analysis time scale is the start of a movie, because the first frame is marked with a zero...

  http://www.vernier.com/til/2185/

• How do I reset my mBot back to the Default Program?

  When you upload a program to mBot through the mBlock software, you replace the Default Program (that was shipped with mBot) with your own program....

  http://www.vernier.com/til/4153/

• Where can I get VPAT forms for Vernier products?

  Some school districts require the submission of the Voluntary Product Accessibility Template form for certain software products. Completed VPAT Forms for the Vernier products listed...

  http://www.vernier.com/til/3527/

• How do I find the MAC address of the LabQuest 2 or LabQuest 3?

  To find the MAC address on the LabQuest 2 or LabQuest 3, do the following: Open the Connections App LabQuest 2⚊Tap on the WiFi Icon....

  http://www.vernier.com/til/3544/

• LabQuest 2 or LabQuest 3 Wi-Fi username field is wrong and grayed out

  If you have a LabQuest 2 that was connected to a WPA2 Enterprise network where you enter a username/password, and either you mis-typed the username...

  http://www.vernier.com/til/4473/

• Networking for LabQuest 2 and LabQuest 3—FAQ and Troubleshooting

  This information pertains to LabQuest 2 and LabQuest 3. If you have an original LabQuest, see this article. INITIAL SETUP [til 2725] [til 2726] [til...

  http://www.vernier.com/til/2669/

• My school Wi-Fi requires a username and password (WPA2 Enterprise). Can LabQuest 2 or LabQuest 3 connect to this network?

  This information pertains to LabQuest 2 and LabQuest 3. If you have an original LabQuest, see this article. LabQuest 2 and LabQuest 3 support many...

  http://www.vernier.com/til/2665/

• Go Direct Oxygen Gas Troubleshooting and FAQs

  Specifications and User Guide TROUBLESHOOTING Primary Test: Blow on the sensor. Do you see a decrease in the Oxygen Gas reading? This tells you that...

  http://www.vernier.com/til/4127/

• Go Direct CO2 Troubleshooting and FAQs

  Specifications and User Guide TROUBLESHOOTING Note: These instructions are for the Go Direct CO2 Gas Sensor. For information regarding the , see [til 1366] -Primary...

  http://www.vernier.com/til/4128/

• What is the thread on the bumpers and hooks for Vernier Force Sensors?

  This article refers to the following sensors: The hooks and bumpers used with our various force sensors have a 6-32 thread. You can usually buy...

  http://www.vernier.com/til/1862/

• My LabQuest unit got very wet, and now it won't turn on. What can I do?

  LabQuest is designed to be splash-resistant, but is not waterproof. If the unit is immersed or gets very wet, permanent damage can result. Such damage...

  http://www.vernier.com/til/2425/

• Why is Logger Pro/Logger Lite giving an error about mfc140u.dll or 0xc000007b?

  This is fixed in Logger Pro version 3.15, if you are running an older version of Logger Pro you should update to version 3.15 here:...

  http://www.vernier.com/til/4047/

• FAQs for IT professionals at schools

  Top FAQs[til 2716][til 1681][til 4199][til 2444][til 3947][til 3678][til 629] Accessing Software Installers and Passwords[til 2716]Note: Instructors and IT staff in the United States can create...

  http://www.vernier.com/til/3144/

• How can I update to new Vernier equipment and still make use of my old Vernier equipment?

  Below you will find a list of things to consider when upgrading your equipment. Each situation is different. If you need help figuring out which...

  http://www.vernier.com/til/1961/

• Where can I purchase a Go Direct Mini GC for non-educational purposes?

  Vernier only sells to educational institutions. For non-educational inquiries, please direct to: Louis Haerle President Seacoast Science,Inc. 2151 Las Palmas Drive Suite C Carlsbad, CA...

  http://www.vernier.com/til/4439/

• Which Vernier sensors are submersible in water?

  Most Vernier sensors are not meant to be completely submerged in water. In general, sensors that measure some parameter of water, e.g., pH, conductivity, or...

  http://www.vernier.com/til/4432/

• Is the Go Direct 3-axis Magnetic Field Sensor submersible?

  This article refers to the For information about the , see [til 1420] The wand portion of Go Direct 3-Axis Magnetic Field is water resistant...

  http://www.vernier.com/til/3925/

• Why can't my device find Go Direct SpectroVis Plus Spectrophotometer when I try to connect via Bluetooth?

  Note: This document addresses a Go Direct SpectroVis Plus that will not connect at all to a device via Bluetooth wireless technology. If instead you...

  http://www.vernier.com/til/4118/

• How do I deter student access to various network settings in LabQuest 2 or LabQuest 3?

  There is a user preference in LabQuest 2 and LabQuest 3 to deter student access to naming, network, and connections settings. This is not a...

  http://www.vernier.com/til/3004/

• How can I move data collected on a LabQuest to Graphical Analysis 4 on a Chromebook if I can't use Wi-Fi?

  Data can be moved most easily from LabQuest 2 or LabQuest 3 to a Chromebook via Wi-Fi. Instructions can be found in [til 3467]. However,...

  http://www.vernier.com/til/4422/

• What is the shelf life of a new LabQuest replacement battery?

  This is really a difficult question to answer and will vary battery to battery. We can’t provide a specific shelf life for the batteries but...

  http://www.vernier.com/til/4421/

• How do I get an A260/A280 value with your UV-VIS spectrometers in Logger Pro?

  WHAT IS THE A260/A280 RATIO? This ratio is used to determine the purity of a DNA or protein sample. Contamination of a nucleic acid solution...

  http://www.vernier.com/til/2578/

• Do you have a spectrometer that can measure DNA concentration and purity?

  Yes, the and the can be used to assess DNA purity and concentration. DNA has an absorption maxima at approximately 260nm. At 260nm, an A260...

  http://www.vernier.com/til/1683/

• How is the temperature compensation calculated on my conductivity probe (CON-BTA)?

  The is automatically temperature compensated between temperatures of 5 and 35°C. Note that the temperature of a solution is being read by a thermistor that...

  http://www.vernier.com/til/2959/

• Which calculators that Vernier sells have TI SmartView emulator software?

  The following calculators have TI SmartView emulator software available from Texas Instruments: TI-83 Plus, TI-84 Plus (all models)Use TI-Nspire and TI-Nspire CAS Handhelds (all models)...

  http://www.vernier.com/til/1928/

• Vernier Circuit Board 2 Troubleshooting and FAQs

  Specifications and User Guide This article is about the Vernier Circuit Board 2, introduced in late 2015. Information about the original Vernier Circuit Board can...

  http://www.vernier.com/til/3490/

• Is there a way to connect my CO2 sensor to an NXT Mindstorm?

  (This information refers to the LEGO NXT robotics system. The information should be similar for LEGO EV3. However, this has not been tested.) There is...

  http://www.vernier.com/til/2236/

• What products do I need to buy to use TI-Navigator if my class size is not 10 or 30 students?

  TI-Navigator Systems come in 10-user and 30-user configurations. There is also a 10-User add-on option for supporting different class sizes. TI-Nspire Handhelds TI-Navigator Systems do...

  http://www.vernier.com/til/4392/

• How does a colorimeter compare to a spectrometer?

  A spectrophotometer can be set to measure % transmittance and/or absorbance over a wide range of wavelengths. Our Colorimeter can only measure four specific wavelengths...

  http://www.vernier.com/til/356/

• Why is my 2 volt solar panel putting out more than 3 volts?

  In early 2014, some KidWind kits included a 3V/200mA solar panel instead of a 2V/400mA panel. You can differentiate between the 2V/400mA and 3V/200mA solar...

  http://www.vernier.com/til/3266/

• What is the best light source to make solar panels work indoors?

  This article refers to experiments using the . We have recommended a load resistance for each light source listed below. Note that the recommendations are...

  http://www.vernier.com/til/3684/

• What Bluetooth radio do I need for Go Direct Sensors and Python?

  To connect to your Go Direct device to Python via Bluetooth® wireless technology, you will need a Bluegiga BLED112 Bluetooth® Low Energy Dongle. https://www.silabs.com/products/wireless/bluetooth/bluetooth-low-energy-modules/bled112-bluetooth-smart-dongle Related...

  http://www.vernier.com/til/4370/