Shop
Search
- What are the specs for the generator in the KidWind kit? - Technical ...
- The Advanced Wind Energy Kit also includes the High Torque Generator with Wires (KW-HIGEN). This generator also has a 2 mm diameter shaft, but the body has ...
- https://www.vernier.com/til/3155
- Which generator should I use to pump water? - Technical ...
- The high-torque generator can be purchased separately. High Torque Generator with Wires (KW-HIGEN) KidWind Advanced Wind Experiment Kit (KW-AWX).
- https://www.vernier.com/til/3130
- Can I upgrade from a KidWind Basic Wind Turbine Kit to the ...
- High Torque Generator with Wires (1) · Motor Mount Pack (1) · 250 ml Graduated Cylinder (1) · Small Water Pump (1) · 12″ x 1/4″ Clear Tubing (1)
- https://www.vernier.com/til/3354
- What is the difference between the KidWind simpleGen and the GENPack?
- There are two Do It Yourself generator options for KidWind wind turbines. They are suited for different activities. Both are designed for educational purposes and...
- http://www.vernier.com/til/13082/
- macOS gives a message on launch of Logger Pro that "Logger Pro has not been optimized for your Mac"
- Logger Pro 3.15 and earlier will generate an error message on computers running macOS 10.14.4 and later. The full text of the error message is...
- http://www.vernier.com/til/4386/
- Power Amplifier Troubleshooting and FAQs
- Specifications and User Guide TROUBLESHOOTING – Primary Test: First test the connections: -Does the yellow LED turn on when you flip the front switch on...
- http://www.vernier.com/til/1986/
- Can I purchase individual parts from one of the KidWind kits?
- In working with the KidWind nonprofit organization, we developed kits that are as inexpensive as possible. The kits contain the most popular configurations of the...
- http://www.vernier.com/til/4324/
- What are the system requirements for Logger Pro and Logger Lite?
- System recommendations for Logger Pro 3.16.2 (released March 2021) and Logger Lite 1.9.4 (released May 2018): Any computer purchased in the past three years will...
- http://www.vernier.com/til/1579/
- My Power Amplifier will produce an AC voltage but not a DC voltage
- The is designed to amplify output both AC and DC signals from a LabQuest. If you find that you cannot get a DC output voltage...
- http://www.vernier.com/til/4221/
- How can I measure currents outside the range of the Vernier Current Probe?
- For currents greater than 0.6 A, we recommend our , which has a range of +/- 10 A, our which has a built-in current probe...
- http://www.vernier.com/til/1139/
- Does Vernier have a function generator for Chromebooks?
- Vernier does not have a function generator application that operates on a Chromebook. In order to provide a wave function to the , you will...
- http://www.vernier.com/til/3991/
- What is the difference between the KidWind SimpleGEN and the KidWind GENPack?
- and are both kits to allow students to make a basic AC generator. Short version: The SimpleGEN is simpler and we recommend it for for...
- http://www.vernier.com/til/3547/
- How do I use a multimeter with a KidWind setup?
- The following PDF document shows how to use a multimeter to measure current or voltage in a KidWind setup. Two multimeters are needed to measure...
- http://www.vernier.com/til/3935/
- Why does my temperature sensor read a value that does not change and is very high/low?
- If the reading of a or never changes or gives erroneous readings, it is probably damaged and can not be repaired. Often a damaged sensor...
- http://www.vernier.com/til/2345/
- What is the difference between the LabQuest Mini and the LabPro?
- If you already own several LabPros that you use with computers and are looking to add additional stations, the LabQuest Mini is our recommended option....
- http://www.vernier.com/til/2186/
- Why do I get strange waveforms from the Power Amplifier Function Generator application?
- Our is a great option for driving a speaker, such as our , or an AC circuit. The Power Amplifier requires a function generator to...
- http://www.vernier.com/til/3553/
- Why did the wires on my wind turbine generator come off?
- The most frequent cause of wires becoming detached from the KidWind Wind Turbine Generator is stress on the connection. Repeated bending of the wire at...
- http://www.vernier.com/til/3164/
- Where can I buy sources for nuclear radiation activities?
- Radioactive sources are available from a number of suppliers. We recommend Spectrum Techniques highly. Spectrum Techniques 106 Union Valley Road Oak Ridge, TN 37830 (865)...
- http://www.vernier.com/til/1019/
- Why does my Power Amplifier cause my LabQuest to disconnect from Logger Pro when I try to set the frequency?
- This can occur if you have a Power Amplifier plugged into a to LabQuest that is connected to a computer running Logger Pro data-collection software....
- http://www.vernier.com/til/3439/
- Readings from my Vernier Microphone are very noisy on LabQuest 2 or LabQuest 3.
- This information pertains to LabQuest 2 and LabQuest 3. If you have an original LabQuest, see this article. The combination of an older version of...
- http://www.vernier.com/til/2737/
- Is the yellow plug on my Kid Wind Mini Wind Turbine supposed to have a hole in it?
- In late 2014, some KidWind Mini Wind Turbines were shipped with a yellow plug that was not pre-drilled. The yellow plug fits in the bottom...
- http://www.vernier.com/til/3309/
- The KidWind Mini Turbine does not light the red LED or work with the sound and light board.
- This article specifically refers to the use of the and with the . If you suspect your generator does not work and you are not...
- http://www.vernier.com/til/3223/
- How do I repair a KidWind Mini Wind Turbine nacelle that is incorrectly wired?
- If you have confirmed that your KidWind Mini Wind Turbine is incorrectly wired inside the nacelle, and you wish to repair it yourself, this is...
- http://www.vernier.com/til/3224/
- How do I test a KidWind generator?
- This document is in reference to the This generator is included in: This is the same generator that is part of:...
- http://www.vernier.com/til/3183/
- Are the files for the first edition of Physics with Vernier included with the latest version of Logger Pro?
- All the original experiment files for the first edition of Physics with Vernier are included with the latest release of Logger Pro (version 3.8.6.2). To...
- http://www.vernier.com/til/3118/
- 30-Volt Voltage Probe Troubleshooting and FAQs
- Specifications and User Guide TROUBLESHOOTING – Primary Test: See if the sensor is automatically recognized by the software – Secondary Test: Apply a voltage across...
- http://www.vernier.com/til/2322/
- How do I change the color of the points plotted in video analysis in Logger Pro?
- To change the color of the point plotted on the video, follow these steps: In the table, double click on the column header for the...
- http://www.vernier.com/til/2817/
- LabQuest 2 Home icon and Home Key do not respond.
- This is likely the result of the LabQuest desktop software not functioning as expected. To verify this, close all applications and quit the LabQuest Application...
- http://www.vernier.com/til/2776/
- Why is my High Current Sensor is giving inconsistent readings?
- The High Current Sensor uses a Hall-Effect sensor to measure the current. The Hall Effect is a magnetic phenomenon, so a strong magnetic field in...
- http://www.vernier.com/til/2765/
- I can't add points to a movie with frame rate override.
- Due to an issue in Logger Pro 3.8.4 and 3.8.4.2, you must add points to a video before overriding the frame rate in Movie Options....
- http://www.vernier.com/til/2451/
- LabQuest error message: Could not open audio device for playback.
- This information pertains to LabQuest 2 and LabQuest 3. If you have an original LabQuest, see this article. You can use the Sound Recorder App...
- http://www.vernier.com/til/2679/
- Can I use my TI calculator as a function generator?
- For most TI calculators the answer is yes. Note: The Function generator is not supported by TI-NSpire technology. In addition to the sensor, you will...
- http://www.vernier.com/til/2674/
- When I perform video analysis on a movie with a VERY high frame rate, the points do not sync with the movie during playback.
- When performing video analysis on a movie with an extremely high frame rate (1000+ fps), the points may play back out-of-sync with the movie. This...
- http://www.vernier.com/til/2484/
- Mac OS 10.6 (Snow Leopard): Why do files of type .ga3 open in Logger Pro or files of type .cmbl open in Graphical Analysis?
- When Logger Pro and Graphical Analysis are both installed on a Mac running OS 10.6 (Snow Leopard), pre-installed files from one program may open in...
- http://www.vernier.com/til/2413/
- How do I apply a torque to the Rotating Beam of the Centripetal Force Apparatus?
- For simple experiments, you can simply use your hand. For more complex experiments, you can use the Ultra Pulley (included with the CFA) and a...
- http://www.vernier.com/til/2395/
- The lab instructions don't match what I see on the LabQuest screen.
- Most of the Vernier lab books contain printed instructions specific to Logger Pro for computer. For example, the instructions will refer to opening a particular...
- http://www.vernier.com/til/2243/
- Can I use Vernier equipment in a weather balloon?
- Vernier products are designed to be used by students in a classroom. We do not build products for weather balloons. However, some educators have made...
- http://www.vernier.com/til/2191/
- Can I get analog output from a LabQuest?
- Yes. LabQuest is capable of putting out an analog output signal to the audio out connector. The miniature stereo connector is located on the left...
- http://www.vernier.com/til/1837/
- How do I use the function generator and analog output feature of LabPro?
- All you need is Logger Pro. Just connect a Voltage Probe (VP-BTA) to channel 4, click on the LabPro icon on the toolbar or choose...
- http://www.vernier.com/til/1821/
- Do Vernier Lab Books include experiments written for the LabQuest App?
- Yes. We updated our books for use with LabQuest. The “___ with Vernier” books all include versions of the activities for use with the LabQuest...
- http://www.vernier.com/til/1637/
- Is there a way to get the ProScope to focus when used with a microscope?
- When using the ProScope with a microscope and a computer, the microscope tube adapter (BD-MTA) requires adjustment before an image can be observed. To adjust...
- http://www.vernier.com/til/1692/
- Why does the speed of sound experiment in Physics with Computers not work in Logger Pro 3?
- The experiment file for Speed of Sound (activity 24) supplied with Logger Pro 3.1 and 3.2 is flawed. It collects data immediately instead of waiting...
- http://www.vernier.com/til/1215/
- Do you carry the 400x lens for ProScope?
- We tested the 400x lens in 2005 and we decided not to carry it. Because of the high magnification, this lens has a very narrow...
- http://www.vernier.com/til/1595/
- Why does event with entry mode in Logger Pro give me doubled event entries?
- This is a bug in Events with Entry data collection mode in Logger Pro 3.3 and Logger Lite 1.2. If the Events with Entry column...
- http://www.vernier.com/til/1306/
- Can I change the graph highlight color in Logger Pro 3 or Graphical Analysis 3?
- When you select a region on a graph in Logger Pro 3 or Graphical Analysis 3, the region is shown as an intersection of light...
- http://www.vernier.com/til/1212/
High Torque Generator with Wires
SAVE/SHARE YOUR CART