Shop
Search
- Will LabQuest work with the Wireless Dynamics Sensor System ...
- ... running LabQuest software version 1.5 or higher, using a Vernier-approved USB Bluetooth radio (WDSS Wireless Receiver (BLUE-USB), sold separately).
- https://www.vernier.com/til/1771
- What are the wireless capabilities of the original LabQuest ...
- When using a WDSS Wireless Receiver (BLUE-USB), the original LabQuest supports Bluetooth for connecting to the Wireless Dynamics Sensor System (WDSS, ...
- https://www.vernier.com/til/1767
- Bluetooth Help and Troubleshooting Tips related to the Wireless ...
- The Vernier Wireless Dynamics Sensor System (WDSS) transfers data to a computer ... The terms radio, dongle, adapter and transceiver are variously used to ...
- https://www.vernier.com/til/4429
- Bluetooth Wireless FAQs - Technical Information Library
- A: Bluetooth is a common short-range wireless communications method. It is used in devices such as cell phone ... See< WDSS Wireless Receiver (BLUE-USB).
- https://www.vernier.com/til/1611
- What are the system requirements for Logger Pro and Logger Lite ...
- You can add a USB Bluetooth radio to computers; see WDSS Wireless Receiver (BLUE-USB). WDSS is not supported on macOS 11 and newer.
- https://www.vernier.com/til/1579
- Are Vernier and Pasco products compatible? - Technical Information ...
- Will the Motion Encoder Cart and Receiver work with a Pasco track? ... How do I connect a Wireless Dynamics Sensor System (WDSS) to a PASCO cart?
- https://www.vernier.com/til/1449
- Go Wireless Heart Rate Troubleshooting and FAQs
- Specifications and User Guide TROUBLESHOOTING– Primary Test: Ensure that the Polar Transmitter Module is attached to the Heart Rate Hand Grips securely. Locate and record...
- http://www.vernier.com/til/3533/
- How do I know if my LabQuest will work with Go Direct Sensors and Go Wireless devices?
- Only the , connected via USB can be used with the original LabQuest. All other Go Direct sensors are not supported. All models of LabQuest...
- http://www.vernier.com/til/3085/
- Why is the WDSS run LED red?
- A WDSS has three LEDs: Yellow charging LED Red/green Bluetooth LED Red/green run LED For longer runs, the run LED flash time can last as...
- http://www.vernier.com/til/2410/
- What do you recommend to replace the WDSS?
- The Wireless Dynamic Sensor System was discontinued in 2019 because certain parts were no longer available. This multisensor included a 3-axis accelerometer, a force sensor,...
- http://www.vernier.com/til/4498/
- Problems with force sensor giving bad readings because hex barrel has been removed and improperly reinstalled.
- This article refers to the following products: All three of these sensors have a hexagonal barrel, or standoff, extending from the sensor case. This part...
- http://www.vernier.com/til/2149/
- Go Wireless Temp cannot be used with Windows 10 Creators Update and Logger Pro
- On April 11, 2017, Microsoft released a major update to Windows 10. Called the Creator’s Update, the build number is 15063. This new version of...
- http://www.vernier.com/til/3960/
- WDSS Troubleshooting and FAQs
- Specifications and User Guide TROUBLESHOOTING Primary Test: There is extensive information on installing Bluetooth radios and establishing radio communications with WDSS, see [til 4429] Secondary...
- http://www.vernier.com/til/1554/
- What is the thread on the bumpers and hooks for Vernier Force Sensors?
- This article refers to the following sensors: The hooks and bumpers used with our various force sensors have a 6-32 thread. You can usually buy...
- http://www.vernier.com/til/1862/
- My Go Direct SpectroVis Plus Spectrophotometer intermittently drops the connection while using Bluetooth.
- Note: This document addresses intermittent Bluetooth connections. If you are unable to connect at all by Bluetooth see: [til 4118] If your successfully connects to...
- http://www.vernier.com/til/4425/
- Will my device work with Go Direct Sensors via Bluetooth?
- Go Direct sensors work with devices that run Mac OS, iOS, Windows, Chrome OS, and Android. Not every device is created equally, so to know...
- http://www.vernier.com/til/3857/
- How do I connect my LabQuest Stream via Bluetooth to Graphical Analysis or Graphical Analysis Pro?
- This information pertains to iOS and Android devices. Computers and Chromebooks do not support this functionality. To use a LabQuest Stream wirelessly with Graphical Analysis...
- http://www.vernier.com/til/4273/
- What is the difference between a Go Wireless sensor and a Go Direct sensor?
- The main difference is hardware and software compatibility for each type of sensor. Go Wireless sensors were originally designed to allow for data collection on...
- http://www.vernier.com/til/4023/
- Is it OK to use Go Wireless or Go Direct sensors in a vacuum?
- It is not recommended that these products be used in a vacuum or very low pressure environment such as that created by a classroom-grade vacuum...
- http://www.vernier.com/til/3775/
- Can I use my WDSS with the Go Direct Centripetal Force Apparatus?
- You can attach the to the beam of the . This will allow you to collect force and acceleration data. We recommend using the for...
- http://www.vernier.com/til/4260/
- Go Wireless Temp - Data Collection Details
- Data Collection with Go Wireless Temp FAQs Q: What are the steps to start data collection with a Go Wireless Temp? A: Follow the instructions...
- http://www.vernier.com/til/3135/
- How do I change units for Go Wireless Temp?
- The default unit for temperature for a Go Wireless Temp is °C. Graphical Analysis GW app for Android To change units, select Toggle Units from...
- http://www.vernier.com/til/3143/
- How do I tell multiple Go Wireless devices apart?
- If you have a classroom set of Go Wireless Devices it can be hard to tell one from another because they are all identical in...
- http://www.vernier.com/til/3642/
- Why doesn't the Wireless Sensors option in Graphical Analysis GW work on my Android device?
- If you are using Go Direct Sensors, you need to use Graphical Analysis app for data collection. If you are using Go Wireless Temperature, Go...
- http://www.vernier.com/til/3383/
- Data Sharing: How many devices running Graphical Analysis or Graphical Analysis Pro can I connect to a single LabQuest device?
- There is no set limit to the number of connections LabQuest 2 or LabQuest 3 supports via Vernier Data Share with Graphical Analysis or Graphical...
- http://www.vernier.com/til/2663/
- How many wireless devices can I connect to at the same time on a LabQuest 2 or LabQuest 3?
- The maximum number of wireless devices the LabQuest App can support is three of any one type of device, up to a total of six...
- http://www.vernier.com/til/4212/
- Why does my LabQuest Viewer hang when looking at the list of discovered Go Direct sensors?
- When using the LabQuest Viewer with a LabQuest and Go Direct sensors, you may find that the list of discovered Go Direct sensors will not...
- http://www.vernier.com/til/4215/
- Go Direct Motion Troubleshooting and FAQs
- Specifications and User Guide TROUBLESHOOTING – Primary Test: Press the power button on the sensor to turn it on. (The red LED will flash.) Start...
- http://www.vernier.com/til/4112/
- Which Go Direct Sensor should I take to the amusement park?
- For amusement park physics, we recommend using the . In addition to the 3-axis accelerometer and 3-axis gyroscope, the Go Direct Acceleration also includes an...
- http://www.vernier.com/til/4164/
- Data Collection with Go Wireless pH/Electrode Amplifier FAQs
- Data Collection with Go Wireless pH/Electrode Amplifier FAQs Q: What are the steps to start data collection with a Go Wireless pH? A: Follow the...
- http://www.vernier.com/til/3375/
- Go Wireless App Troubleshooting and FAQs
- Update 2016 **We recommend you use the free Graphical Analysis app instead of this out-of-date app.** Go Wireless app is available for iPad, iPhone, and...
- http://www.vernier.com/til/3142/
- I updated Logger Pro and no longer can connect to my Go Wireless Temp
- Applies to builds of Windows 10 prior to Creators Update, version 1703. Updating Logger Pro to version 3.13 on Windows 10 will result in the...
- http://www.vernier.com/til/3915/
- How do I connect to a LabQuest Stream via Bluetooth using Logger Pro?
- To use a LabQuest Stream wireless with Logger Pro, you must be running version 3.13 or newer. 1. Turn on LabQuest Stream and connect a...
- http://www.vernier.com/til/3903/
- Motion Encoder System only shows position without velocity or acceleration, and units are in mm.
- It is possible for a Motion Encoder to incorrectly announce its name to the software, causing the Auto-ID feature to fail. This issue is likely...
- http://www.vernier.com/til/3728/
- My force sensor fell into the floor, and now the hex bolt sheared off inside the load cell.
- If a Dual Range Force Sensor or Wireless Dynamics Sensor (WDSS) hits the floor, it is possible to shear off the hex bolt inside the...
- http://www.vernier.com/til/3815/
- Where do I find the serial number and hardware/firmware version numbers of my Go Wireless sensor?
- You can find this information using the Go Wireless data-collection software. Go Wireless app or Graphical Analysis GW for iPad, iPhone, and iPod touch 1....
- http://www.vernier.com/til/3138/
- How do I change the name of my Go Wireless sensor?
- By default, Go Wireless sensors are shipped with the same default name. When using multiple sensors in the same classroom, it can be advantageous to...
- http://www.vernier.com/til/3137/
- Do you have data-collection apps that work with Android?
- The following applications are available for Android devices: Graphical Analysis App https://www.vernier.com/product/graphical-analysis-4/ This is our main data collection app for Android devices. With this app...
- http://www.vernier.com/til/2360/
- How do I remove or replace a Go Wireless Temp battery?
- Follow these instructions to remove or replace a , in your Go Wireless sensor. This procedure ONLY works for the GW-TEMP. Do not try replacing...
- http://www.vernier.com/til/3173/
- LabQuest Viewer Computer Software Troubleshooting and FAQs
- The information that follows is for LabQuest Viewer software for Windows® and Macintosh® computers. If you are looking for information about the LabQuest Viewer App...
- http://www.vernier.com/til/2661/
- How do I connect my Go Wireless Heart Rate to the Graphical Analysis App?
- Make sure you are using a supported device and running the most recent version of either the Graphical Analysis/Graphical Analysis Pro App or the Graphical...
- http://www.vernier.com/til/3517/
- Motion Encoder Cart turns on but does not register motion.
- SYMPTOM A Motion Encoder Cart fails to record any motion when used with a . TROUBLESHOOTING Troubleshooting is easiest if you have multiple Encoder Carts....
- http://www.vernier.com/til/3331/
- Why is my Go Wireless sensor not communicating with my Android tablet even though the LED is flashing green?
- It is possible for the Android operating system to not fully disconnect from a Go Wireless system, leaving the sensor connected (thus showing the flashing...
- http://www.vernier.com/til/3281/
- What do the different LED states mean on a Go Wireless Sensor?
- For details on the Go Wireless Sensors LED states, please see: Go Wireless Temp: Specifications and User Guide Go Wireless pH: Specifications and User Guide
- http://www.vernier.com/til/3139/
- How do I connect a Wireless Dynamics Sensor System (WDSS) to a PASCO cart?
- A Wireless Dynamics Sensor System (WDSS), , can be connected to a PASCO dynamics cart using the included base plate and hardware. The plate connects...
- http://www.vernier.com/til/3290/
- Where is the accelerometer located inside the WDSS?
- To use the internal sensors on the WDSS to make rotational physics measurements, it is important to know exactly where the accelerometer is located inside...
- http://www.vernier.com/til/3037/
- When I use my WDSS with LabVIEW it shows a warning about an exception.
- This issue shows when starting a VI to use the WDSS, he would get the following error notification. “Error 1097 occurred at Call Library Function...
- http://www.vernier.com/til/2740/
- Can Logger Pro connect to a LabQuest via Wi-Fi?
- No, Logger Pro cannot connect to a LabQuest via Wi-Fi. The LabQuest data sharing feature on LabQuest 2 and LabQuest 3 is designed to share...
- http://www.vernier.com/til/2850/
- I get a Bluetooth "Enumeration error" or "Error writing to non-volatile memory"
- Logger Pro version 3.8.4 and newer has several improvements to prevent BlueTooth-related errors. If you have an older version, the first thing to try would...
- http://www.vernier.com/til/2362/
- How good is synchronization between two WDSS? Good enough for impulse experiments?
- Two WDSS sensors will only be approximately in sync, and the sync will vary from trial to trial due to jitter in the computer communications...
- http://www.vernier.com/til/2145/
- Logger Pro sees my WDSS by name, but then fails to collect data.
- This is a Windows-only problem. Logger Pro requires Bluetooth radios that use the Microsoft driver. Some third-party drivers will allow Logger Pro to see the...
- http://www.vernier.com/til/2128/
- My IPS AC Adapter does not power my LabPro, WDSS, or Stir Station.
- Between 8/27/08 and 9/5/08, a small number of power supplies were shipped that were defective. If you received a power supply around this time with...
- http://www.vernier.com/til/1876/
WDSS Wireless Receiver
SAVE/SHARE YOUR CART