No. The CBL Photogate Adapter and the CBL Dual Photogate Adapter connect to an analog channel on an original CBL. These adapters only work with the original CBL.

For CBL 2, LabPro, LabQuest – all models, TI-Nspire Lab Cradle, and SensorDAQ, you will need to connect the photogate(s) to the DIG/SONIC port on these interfaces. To do this, the photogate will require a different adapter or cable as noted below:

For photogates with a removable cable, you will need:
BT Photogate Cable (PG-BTD)

For photogates with a hard-wired cable, you will need:
LabPro Digital Adapter (DG-BTD)

Note: Photogates do not work with Go!Link or EasyLink sensor interfaces.