The following OHAUS balances can be used to collect data with an original LabQuest (v 1.7.5 or newer), LabQuest 2 (v 2.7.2 or newer), or LabQuest 3 (any version).

OHAUS Scout^® 220 g (OHS-222)
OHAUS Scout^® 420 g (OHS-422)
OHAUS Scout^® 120 g (OHS-123)

To collect data using one of the OHAUS Scout models above, connect it to the LabQuest using an OHAUS Scout® USB Cable (OHS-USB). Choose New from the File menu of the LabQuest and the mass should be displayed. Note that the balance must be running software version Sr. 1.02 or newer.

The following older OHAUS balances can also be used to collect data on an original LabQuest (v 1.7.2 or newer), LabQuest 2 (v 2.3.1 or newer), or LabQuest 3 (any version).

Scout Pro 0.01 g Balance (200 g) (OHSP-202, discontinued)
Scout Pro 0.01 g Balance (400 g) (OHSP-402, discontinued)
Scout Pro 0.001 g Balance (120 g) (OHSP-123, discontinued)

To collect data with one of the Scout Pro models above, they must be outfitted with the Scout Pro USB Connection Kit (OHSP-USB). After installing the cable on the balance, connect it to the LabQuest and choose New from the File menu of the LabQuest.

Some of the OHAUS Adventurer series will work with the original LabQuest (v 1.7.5 or newer), LabQuest 2 (v 2.7.2 or newer), or LabQuest 3 (any version). A standard USB cable is required.

Some of the OHAUS Adventurer Pro series of balances do not work with LabQuest devices (any model).

Please note that other models of OHAUS balances probably will not work with Vernier technology.

Which OHAUS balances can I use with Vernier technology?