Using Chemistry Instruments with iPad/iPhone

Get Instrumental Analysis

Instrumental Analysis is our free application to collect, graph, and analyze data from select Vernier chemistry instruments. If you don't have Instrumental Analysis installed, please download and install it first.

Connect Your Chemistry Instrument Using Bluetooth®

1. Ensure your chemistry instrument is charged or connected to a power source.
2. Turn the instrument on (the Bluetooth LED will flash red).
3. Launch Instrumental Analysis.
4. Click or tap .
5. Choose your instrument from the list of discovered devices.
   • Your sensor’s ID is located near the barcode on the sensor label.
   • You can type part of your sensor’s ID in the  to quickly find your sensor.
   • The Bluetooth LED on the instrument will flash green when successfully connected.
6. If you are using a Go Direct Mini GC, you can change the default sensor channels.
   1. Click or tap  .
   2. Select the sensor channels you want to use.
7. Click or tap .
8. Select the appropriate experiment type for your instrument. Follow the software instructions to continue with data collection.

Resources

• What instruments are supported in Instrumental Analysis?
• Instrumental Analysis Troubleshooting and FAQs
• Connection Instructions for Go Direct Sensors
• Connection Instructions for LabQuest (BTA and BTD) Sensors
• Connection Instructions for Spectrometers

Need Assistance?

If you are having trouble connecting your sensors, please reach out to us.