Graphical Analysis on Android requires a minimum Android OS (see chart below), and an up-to-date Android System WebView. These are updated separately, so it is possible that the WebView component on a tablet may not have been updated in years.
On...
The mBot IR remote is designed to use a CR2025 3-volt coin cell battery.
We have also used a CR2032 in that remote. The last two digits in the battery code is the thickness of the battery in tenths of a millimeter, so that slightly thicker battery...
Yes. You must use the LabQuest 2 or LabQuest 3 interface to control a line on the Digital Control Unit with a Go Direct (GDX) sensor. Physically connect the DCU, connect the Go Direct sensor through software or USB. Program the control of the DCU in ...
Digital Control Unit (DCU-BTD)
Specifications and User Guide
Which Model DCU Do I Have?
There have been three Digital Control Unit (DCU) models over the years. The current model (shown above) is black, rectangular, and has a s...
The Digital Control Unit (DCU-BTD) can be used with any DC electronic component or output device that requires only power and ground connections, such as an LED, buzzer, or fan. Take care to match the DCU power supply to the output devices. For inst...
The maximum number of wireless devices the LabQuest App can support is three of any one type of device, up to a total of six devices. (LabQuest App version 2.8.2 or newer is required.)
Go Direct SensorsYou can connect up to three Go Direct sens...
LabQuest 2.8.3
• Addressed a language localization issue
• Improved Go Direct sensor connection after a reboot
LabQuest 2.8.2
• Support for Go Direct Sensors* via Bluetooth (three sensors maximum)
• Default data rates are no longer...
Go Direct® Energy Sensor (GDX-NRG)
Specifications and User Guide
Troubleshooting
General Test: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting Started instructions for yo...
You will find two sets of letter number pairs separated by a colon in the bottom right hand corner on the bottom label of the SpectroVis Plus (SVIS-PL, discontinued).
The letter and number pairs correspond to the firmware and hardware revision of the...
Instructors, sign in to your Vernier web account at https://www.vernier.com/account/. This will take you to the My Downloads page of your account. If you are already logged in, hover over My Account in the upper-right corner of any page on our we...