Maybe. The answer to this depends on a couple of things.
1. Does your electrode have a BNC connector? If so, you can use it with the Electrode Amplifier (EA-BTA), the Go Wireless® Electrode Amplifier (GW-EA, discontinued), or the Go Direct® E...
Data Collection with Go Wireless pH/Electrode Amplifier FAQs
Q: What are the steps to start data collection with a Go Wireless pH?
A: Follow the instructions for your software: https://www.vernier.com/gw-ph
Q: Can I calibrate the Go Wireless pH?
A:...
Update 2016
We recommend you use the free Graphical Analysis app instead of this out-of-date app.
Go Wireless app is available for iPad, iPhone, and iPod touch. Go Wireless app can be downloaded for free from the App Store. It is no longer a...
3-volt Arduinos are a poor choice when using Vernier Arduino® Interface Shield (BT-ARD) to connect Vernier LabQuest sensors to an Arduino microcontroller. LabQuest sensors require a 5.0 volt power supply. The Arduino UNO R3 and R4, as well as Spark...
Follow one of the following links to your platform-specific calibration instructions:
How do I calibrate a sensor in Logger Pro?
How do I manually calibrate my sensor in LabQuest App?
How do I manually calibrate my sensor in Graphical Analysis and G...
No. Windows 10 S is a variant of Windows 10 that only allows apps downloaded from the Windows Store to run. You cannot install apps from other sources.
Neither Logger Pro nor Graphical Analysis is available in the Windows Store, so these applicat...
In Logger Pro 3.8.7 and 3.9 only, the software expects there to be column titles and expects the column titles to have straight quotation marks (") at the beginning and end of each title. If the column titles do not have straight quotation marks or d...
For most dissolved oxygen testing, it is not necessary to compensate for salinity. The salinity of a sample can have an affect on the dissolved oxygen (DO) concentration in highly saline water (>1 part per thousand salinity). In this case an adjus...
The needle of any syringe used with the Mini GC should have an outer diameter of 0.5 mm or 0.019 inch. This is a 25 gauge needle size.
It should be inserted 1.5 inches into the injection port of the Mini GC. The syringe that Vernier ships with the M...
The weight lifting buckets that come with KidWind Advanced Wind Experiment Kit (KW-AWX) and KidWind Basic Wind Experiment Kit (KW-BWX) and their respective classroom packs can be purchased from IKEA.
The buckets are the KALAS Tumbler.
You can ei...