First try the following:
1) Connect the sensor to a Vernier interface and the default readings in kPa are NOT around 101 kPa
AND
2) Connect the 20 mL syringe from the Accessories Kit to the sensor, move the plunger inward and the pressure reading...
Yes, the channels are identified by their primary wavelength - 615 nm, 525 nm, and 465 nm. The color of the traces on the graphs correspond to the colors that are detected:
615 nm - red
525 nm - green
465 nm - blue
Interestingly, the color of trace...
The Conductivity Probe (CON-BTA), as well as the Go Direct® Conductivity Probe (GDX-CON), electrode body is made of ABS plastic with a graphite electrode while the Platinum-Cell Conductivity Probe (CONPT-BTA), electrode body is made of epoxy with...
In order to calibrate a Conductivity Probe, or to confirm that a saved calibration is accurate, you should have a supply of standard solutions that cover the range of values you will be measuring. There are multiple ways to obtain these solutions:
...
No. None of our ORP sensors can be used for Cyclic Voltammetry; but we do offer an instrument that will do this directly: Go Direct® Cyclic Voltammetry System (GDX-CVS)
The Oxidation-Reduction Potential (ORP) Sensor is a two-electrode system t...
There are a few things to consider to help improve the performance of your ORP readings:
1) The accuracy of a new electrode is +/- 20 mV. If you are seeing changes over time within 20 mV of a value, then it's just noise.
2) If the value is d...
The ideal test solution for an ORP electrode is a commercially-produced standard. Many companies sell ORP standards: Hach, Cole Parmer, and Hanna are three examples.
You can also prepare you own test solution. Here are the recipes for two:
Light's S...
The Vernier Arduino® Interface Shield (BT-ARD), has four sensor ports; two analog and two digital. The shield connects the sensor lines to the following Arduino pins:
Analog 1
Sensor pin 1 (+/-10 V output line) - Arduino pin A1
Sensor pin 2...
Vernier does sell a Dual-Range Force Sensor (DFS-BTA), and a Go Direct® Force and Acceleration Sensor (GDX-FOR), that can be used for this application. We have not tested these sensors in-house, but several college professors have told us that th...
Vernier currently sells four different types of Heart Rate sensors, the Go Wireless Heart Rate, the Go Wireless Exercise Heart Rate, the Hand Grip Heart Rate Monitor and the Exercise Heart Rate Monitor. All products use a Polar Transmitter Module, th...