Platinum-Cell Conductivity Probe (CONPT-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Plug the sensor into a Vernier interface, run the data-collection program, and take a reading in a solution of known Tot...
While the temporal integral of acceleration is velocity, and the second integral is position, it is very difficult in practice to use an accelerometer alone to find velocity and acceleration.
One might want to use an accelerometer, such as the on...
Mold growth normally appears as small blackish or grayish specks in the electrode storage solution, and it can also stick to the walls of the bottle and the sensor tip. It does not affect the accuracy or the response of the sensor, but it should be c...
LabQuest Viewer 2.0 for iPad crashes on launch if it is installed on an iOS 8 iPad that is then updated to iOS 9.
To resolve this issue, delete and reinstall LabQuest Viewer.
...
This issue was resolved with the release of Video Physics 3.0.3. Update to this version (or newer).
...
This information pertains to LabQuest 2 and LabQuest 3.
If you have an original LabQuest, see this article.
If LabQuest 2 or LabQuest 3 won't turn on at all and the screen remains dark, there could be a hardware problem and it may need to come...
The Photogate Bracket (PGB-VDS) will work on a PASCO track with a minor modification.
The slot on the side of the PASCO track is a little narrower than the slot on the side of the Vernier track. The Vernier Photogate Bracket has little nubs that k...
For Go Direct ISEs (order codes begin with GDX-), simply enable the sensor's mV channel in the app.
For most LabQuest ISEs (order codes end in -BTA), there is an experiment file within Probes & Sensors-->ISE folder in Logger Pro (version 3.4 ...
The Sound Level Sensor (SLS-BTA) is a lower cost alternative to the Sound Level Meter (SLM-BTA, discontinued). It is a simple, easily-operated sensor to measure and investigate sound levels in typical classroom environments.
The Sound Level Meter ...
Vernier accelerometers measure acceleration along the line marked by the arrow on the label. Accelerations are normally measured in either meters per second per second (m/s2) or g's. One g is the acceleration due to gravity at the Earth's surface, or...