Do not disassemble the probe for this type of cleaning. Swirl the tip of the probe in a 1:10 dilution of household bleach with water for ~10 seconds. Rinse well with DI water. NOTE: Do not submerge the entire probe. The "handle" is not waterproof....
Do not disassemble the probe for this type of cleaning. Swirl the probe in a 1:10 dilution of household bleach with water for ~10 seconds. Rinse well with DI water....
Standard cleaning is best done with DI water. If sterilization is needed, use ethyl alcohol (typically >90%) or isopropyl alcohol (typically 60-70%) and swirl in solution for ~10 seconds. Then rinse vigorously with DI or tap water and recondition in ...
The only disadvantage of the Vernier Optical DO Probe (ODO-BTA) is that it costs more. It is both easier to use and more accurate than the older Dissolved Oxygen Probe (DO-BTA). The chart below shows a feature comparison.
Feature
Optical DO Probe
...
Vernier LabQuest sensors - those with order codes ending in -BTA and -BTD - are designed to be used with Vernier interfaces and software. When used with a Vernier interface and software, you simply plug the sensor into the interface, connect the inte...
Yes. The Optical DO Probe uses an optical property to measure DO in a water sample. As a result, this probe does not interfere or have compatibility issues with pH, conductivity, salinity probes, or ISEs.
Note that there are some probes, includin...
Logger Pro is set by default to display the correct experiments folder when Open is chosen from the File menu. As a result, most users won't ever have to navigate to that folder manually. Sometimes instructors want to add their own files to this sta...
There are two ways to get your data into a spreadsheet.
Method 1 — Copy and paste the data1. From the data table in the app, select the data you want to transfer to the spreadsheet.2. Right-click and choose Copy.3. Switch to your spreadsheet ap...
To check whether Data Sharing has been installed, look for a Data Sharing item at the bottom of the File menu. If Data Sharing is not installed, run the installer again and follow installer prompts to install Data Sharing.
The Logger Pro for Wind...
An exclamation point on the Wi-Fi icon indicates that the Wi-Fi connection has been made, but the Internet connection is being routed to another address.
In this state, local connections may continue to function, such as printing and Data Sharing;...