The calibration information is dependent on the type of transducer used in the Gas Pressure Sensor (GPS-BTA), which changed with an update to the sensor starting in October 2011. The new calibration has different slope and intercept values. Gas...

The internal volume of the current Gas Pressure Sensor is approximately 0.8 mL. The internal volume of the older style (pre-2005) Pressure Sensor is about 1 mL, but the exact answer depends on the length of tubing connected. Here is a way to test...

We offer a number of libraries, drivers, and example programs for many programming languages. For full details, choose a family of sensors: Go Direct - These versatile sensors connect to your device via Bluetooth® wireless technology or USB. La...

National Instruments has posted an example LabVIEW VI for using a Vernier temperature sensor with NI ELVIS. The example is currently posted in the NI Developer Zone with an article titled "Interfacing VIs for Vernier Biosensors". If you run the examp...

Yes, all of the individual parts found in the Pressure Sensor Accessories Kit (included with each Gas Pressure Sensor) can be ordered as separate pieces, using this order information: Luer-Lock Connector (PS-LUER) Plastic 2-Way Valve (PS-2WAY) ...

LabQuest does not support printing via the USB port on an Apple AirPort router. Network printers (Wi-Fi and ethernet) from the supported printers list can be used when configured by IP address. Supported printers: Which printers are supported...

This information pertains to the original LabQuest.If you have LabQuest 2, see this article. This is a procedure for testing a LabQuest battery to determine if it needs to be replaced. Testing the battery under a known set of parameters will give yo...

This note refers only to LabPro (LABPRO) and not our LabQuest platforms.  LabQuest 2 (LABQ2) has a standard Kensington security slot. The following is a description of how to secure a LabPro, as written by Priscilla Laws at Dickinson college. 1. D...

The movable linear fit is used to manually draw a linear regression over the selected area of a graph and display the slope (m) and y-intercept (b) of that line. It is available in Logger Pro 3.8.4 or newer. Complete the following steps to perform a...

The accuracy is ±2% of reading or ±3°C, whichever is greater @ 18 to 28°C ambient operating temperature. For the full specifications, see: Specifications and User Guide...