Logger Pro is no longer sold and will no longer receive updates.Logger Pro version 3.16.2 is the final release of the software. Symptom When the Logger Pro installer is run, the Logger Pro 3 folder in Applications is updated with the new r...

If you enable the internal temperature sensor and get a reading of 79.3C (174.4F) this is most likely caused by a hardware problem on the unit. Contact Vernier Software and Technology Technical Support to arrange a repair....

If you are using the Polarimeter with a LabPro interface, please do the following: 1) Make sure you are using Logger Pro 3.8.5 or newer. To update your software, go to https://www.vernier.com/support/updates/logger-pro/ 2) Only rotate the analyzer ...

In Vernier Video Analysis To change the color of the point plotted on the video, follow these steps: From the Video tools, click or tap Objects. Click or tap the color circle shown for the object whose color you want to change. Adjust t...

Vernier appreciates the importance of young people becoming involved in science fair projects and other science-related competitions. However, our role in assisting students with these projects must be kept to a minimum, while reflecting the high lev...

Unlike some of our other lab books, our Logger Pro 3 software does not contain data-collection templates for the experiments in the Organic Chem lab book. You may set up your own custom data-collection files, if desired, but one of our goals with the...

The Pasco Adiabatic Gas Apparatus can be used with LabPro or LabQuest. You will need three DIN-BTA adapters to connect the sensor leads from the Gas Apparatus to the LabPro. The Gas Apparatus will also work with the CBL2 or original CBL. In either c...

When a photogate is used with a LabPro in time-based data collection, photogate data is sent by the LabPro to the computer at the end of data collection. If you choose to stop data collection early by clicking the Stop button, the data will not be se...

Pyranometer (PYR-BTA) Specifications and User Guide Troubleshooting Primary Test: Make sure that the sensor detects sunlight. A bright sunny day should approach a thousand Watts/square meter in irradiance. Secondary Test: ...

There is no exact conversion factor. The problem is that lux and W/cm2 are not simply different units, rather they are units for different measurements. mW/cm2 is a unit for irradiance (energy falling on a surface) and lux is a photometric uni...