You can install magnets in the Adjustable End Stop (AS-VDS) so that dynamics carts elastically bounce off the End Stop at low speeds. But the magnets must be installed in a certain orientation to work as intended. To install magnets in the adjustabl...
To manually set up a nonauto-ID sensor in DataMate perform the following steps:
1) Connect the sensor to channel CH 1 on the LabPro or CBL 2.
2) Start the DataMate program. After the program gets to the main screen, press the [Clear] button on th...
Recent versions of Logger Pro (3.5 and newer) allow a dynamic numeric range of 1.1e-99 to 1e99.
Older versions have more limited range.
If a column is set to display any number of decimal places, nonzero values may display as zero. To alway...
The current sensor function of the Power Amplifier (PAMP) can be used at the same time as the analog out function of LabPro, but the procedure is not obvious. Logger Pro 3.8.2 produces some potentially confusing dialogs that must be correctly navigat...
None of the Vernier interfaces, e.g. LabPro, will connect directly to the Fourier MultiLog. In order to collect data with the MultiLog and Vernier sensors, you will need an adapter available from Fourier. We have attempted to summarize the compatibil...
There are circumstances in Logger Pro or Logger Lite for OS X where the toolbar can disappear.
In almost all cases, you have clicked the hide toolbar button (a pill-shaped button) at the upper right corner of the Logger Pro window. This hide but...
The nut is a 1/4-20. ...
Two WDSS sensors will only be approximately in sync, and the sync will vary from trial to trial due to jitter in the computer communications system. This is a matter of OS X and Windows Bluetooth performance. We do not expect two WDSS sensors to be i...
All orders from Puerto Rico are processed through our main office in Beaverton, OR.
For more info see:
https://www.vernier.com/how-to-order/...
LabQuest Mini gets its power through the computer's USB port. There are rare cases in which there is a limit to how much power is available to the USB devices connected to a computer. Such configurations may include having too many other devices tha...