No. The distance between the side groove in the track to the top surface is different between the Vernier and Pasco tracks, so even though the Track-to-Track Coupler will connect a Vernier track to a Pasco track, the cart will have to cross a drop as...
ImagiWorks used to sell an interface that supported Verier sensors. In 2004 ImagiWorks was purchased by PASCO Scientific. Since that time they have developed a wireless system for Palms that supports the PasPort line of sensors, but it does not suppo...
On a few Windows computers the user will get a warning message every time a Go device is connected, warning that exclusive access rights cannot be granted. This will probably not cause a problem, but the error message is annoying.
The problem is ...
No USB/Serial adapter works for the Serial Box Interface and Windows 2000, XP, Vista, or later. The least expensive replacement is to get a Go! Link interface and DIN-BTA adapters.
If you have a computer with USB only (no serial or COM ports), and...
You can get your student force sensor back into working condition by adjusting the offset and the sensitivity to the original settings. This can be a little tricky, but if you follow the following process, the sensor can continue to function:
1. ...
The experiment file for Speed of Sound (activity 24) supplied with Logger Pro 3.1 and 3.2 is flawed. It collects data immediately instead of waiting for the sound to start.
To fix the file, enable triggering with a level of 2.6 to 2.8. Attached i...
We tested the 400x lens in 2005 and we decided not to carry it. Because of the high magnification, this lens has a very narrow depth-of-field, which makes it very difficult to use as a handheld unit. In our tests, anything above 200x magnification wo...
The LabNet Radiation Monitor sold by Pasco scientific can be adapted for use with the ULI. The plug on sensor is an RJ-11 plug, but the pin assignment on that plug is not correct for a Vernier interface. Pasco sells an adapter that switches the pin a...
Most of our products are created as a hybrid cd so that they can be viewed on Mac and Windows. The software that you use to copy the disk must be able to preserve both the Mac and Windows information when making a copy.
The best way to do this is...
Or, a broader question is "How do the data from the WDSS and Motion Detector compare? Both will display acceleration values."
The sync between the WDSS and any other interface is approximate, although it can be quite good. The WDSS has its clock; ...