There is a timing error in the abosrbonce vs. time data collection mode in Spectro Pro when data is collected on a Genesys 20 spectrophotometer. Time may be counted too slowly or too quickly depending on the data collection parameters. The workaround...
Technical specifications for our sensor can be found on our website at: https://www.vernier.com/probes/specs/
If you have any questions that can not be answered by the information found on our website, please contact use by email at: info@vernier....
If your HMP-BTD adapter was shipped prior to November 2000, you likely need a revised HMP-BTD. Please contact Vernier Software at (503) 277-2299 to exchange your adapter.
This problem seems to be more noticeable with newer/faster PC's. The extra p...
The problem is that the ULI, or SBI, can only read positive voltages. Listed below are several options to read both positive and negative voltages:
A) Use our Instrumentation Amplifier (takes +/- voltages and amplifies them so that they can be rea...
The Palm Desktop application must be installed and the handheld HotSync'ed successfully prior to installing Data Pro.
You may find the Palm Desktop for Macintosh on the CD that is packaged with your Palm handheld. Or you may download the Palm Des...
Using DataMate and a CBL 2 or LabPro interface
To use an Instrumentation Amplifier with a TI Graphing Calculator and a CBL 2 or LabPro interface, connect your calculator, and Instrumentation Amplifier to the interface and start DataMate. Then do th...
Your digital video camera may have the ability to record video in several different aspect ratios. This setting may adversely affect video analysis in Logger Pro software and Vernier Video Analysis.
First a review of Vernier’s video analysis fe...
For TI-84 Plus and TI-Nspire calculators, the answer is generally yes; however, you will need a USB adapter (not included) in order to connect the Go! products to a calculator.
For the TI-89 Titanium, the answer is no. Data Collection through t...
The issue is probably a conflict with the new version of DataMate and the calculator operating system (OS). Your calculator needs to be running the newest operating system, otherwise you will get a link error. You can check the calculator's OS by pre...
The current and voltage probes for the CV-BTA system are different from the ones for the CV-DIN system. The former are marked with blue bands on the cables. If you use the probes from a CV-DIN on a CV-BTA, the probes won't autoID properly. Solution: ...