We do not sell a reusable or autoclavable mouthpiece for any of our spirometers.
However, A-M Systems does sell such a product. The part number is 164200. This is a Blue Thermoplastic Mouthpiece. It has an ID of 1 and 1/4"
The website for this prod...
It is not possible to use our software to perform a typical custom calibration on any of our spirometers. But you can adjust the calibration to make them more accurate. You will need a 2L (or larger) calibration syringe to perform the calibration ad...
Go Direct® Spirometer (GDX-SPR)
Specifications and User Guide
Troubleshooting
General: Press the power button on the sensor to turn it on. Connect your sensor as described in the Getting Started instructions for your devic...
The Go Direct® Blood Pressure Sensor (GDX-BP) has a light that indicates if the sensor has reported blood pressure parameters. When the sensor indicator light turns solid green, blood pressure parameters have been reported. If the sensor indicato...
We use use a bacterial filter that is manufactured by Microgard. It is designed to capture 99% of all aerosolized bacterial and viral pathogens. It is the same type of filter used in hospitals by respiratory technicians. This filter is used with the ...
The disposable mouthpiece for the Spirometer has an inside diameter of 32 mm (~1.26 inches) and an outside diameter of 34 mm (~1.34 inches). It is 64 mm (~2.52 inches) in length. Both of these products are used with the Go Direct® Spirometer (GDX...
It is common for tidal volumes to be slightly elevated when using a spirometer in the classroom. Any subject with a foreign object in their mouth will reflexively breathe deeper than normal. If you are using disposable mouthpieces, recorded tidal vol...
Salinity Sensor (SAL-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Plug in the sensor and start up the data-collection program. Place the sensor in distilled water. The reading should be at or near 0 pp...
If you have a LabQuest 2 that was connected to a WPA2 Enterprise network where you enter a username/password, and either you mis-typed the username or you want to enter a different username than before, you will find that the username field in LabQ...
This information pertains to LabQuest 2 and LabQuest 3.
If you have an original LabQuest, see this article.
General Information
GUIDES● Networking for Educators: http://www2.vernier.com/til/2669/labq2_networking_for_educators.pdf...