The disposable mouthpiece for the Spirometer has an inside diameter of 32 mm (~1.26 inches) and an outside diameter of 34 mm (~1.34 inches). It is 64 mm (~2.52 inches) in length. Both of these products are used with the Go Direct® Spirometer (GDX...
It is common for tidal volumes to be slightly elevated when using a spirometer in the classroom. Any subject with a foreign object in their mouth will reflexively breathe deeper than normal. If you are using disposable mouthpieces, recorded tidal vol...
Salinity Sensor (SAL-BTA)
Specifications and User Guide
Troubleshooting
Primary Test: Plug in the sensor and start up the data-collection program. Place the sensor in distilled water. The reading should be at or near 0 pp...
If you have a LabQuest 2 that was connected to a WPA2 Enterprise network where you enter a username/password, and either you mis-typed the username or you want to enter a different username than before, you will find that the username field in LabQ...
This information pertains to LabQuest 2 and LabQuest 3.
If you have an original LabQuest, see this article.
General Information
GUIDES● Networking for Educators: http://www2.vernier.com/til/2669/labq2_networking_for_educators.pdf...
The Connected Science System is a networked collection of technology that supports hands-on, collaborative learning with individualized accountability.
For step-by-step guides on configuring and using the Connected Science System, please see Conn...
This information pertains to LabQuest 2 and LabQuest 3.
If you have an original LabQuest, see this article.
LabQuest 2 and LabQuest 3 support many enterprise networks which require a username and password. This functionality requires LabQuest soft...
Please see the following link for some excellent tips on this subject.
https://www.vernier.com/innovate/tips-for-measuring-oxygen-consumption-and-vo2-max/
VO2 max is a measure of the maximum volume of oxygen that a subject can utilize per un...
The following OHAUS Scout balances can be used to collect data using an original LabQuest (v 1.7.5 or newer), LabQuest 2 (v 2.7.2 or newer), LabQuest 3 (any version), or Logger Pro (v 3.13 or newer) on a Windows or Macintosh computer. An OHAUS Scout&...
Only certain OHAUS balances are supported by Logger Pro 3. See Which OHAUS balances can I use with Vernier technology? for a list of specific models and the required USB cables.
Is your balance plugged in, turned on, and connected to the compute...