This entry refers to Go Direct® Force Plate (GDX-FP) and Force Plate (FP-BTA)—manufactured after November 2023. For more information, see Which force plate do I have?
Go Direct® Force Plate (GDX-FP)
Force Plate (FP-BTA)
If y...
Yes. Some sensors and interfaces that are supported in Logger Pro are not supported in our newer Analysis apps. Below is a list of those devices including options for their continued use and options for replacement.
Sensor Interfaces
Lab...
Lateral Force Accessory (2D-FP)
TROUBLESHOOTING
When used with Go Direct® Force Plate (GDX-FP) connect the lateral force accessory the force plate using the short BTA to BTA cable. Launch the software and connect to your force plate. In S...
Logger Pro version 3.16.2 is the final release of the Logger Pro software. This means that any future Windows or macOS update can break Logger Pro. While you certainly can continue to use Logger Pro as desired, you do so with some risk. The informat...
While the labs in the four RealTime Physics books were originally written to use Logger Pro, they can be done with Vernier Graphical Analysis Pro using the setup files linked below. Note: two labs1 from this collection require Vernier Video Analysis...
While the activities from the book Physics with Video Analysis (PVA-E) were written to use Logger Pro, the activities can be done with Vernier Video Analysis along with Vernier Graphical Analysis Pro using the files linked below.
...
Yes, the Go Direct® Structures & Materials Tester (GDX-VSMT) (or Vernier Structures & Materials Tester (VSMT)) has the range and resolution to measure the stretch and strength of thin plastic films, such as household kitchen Saran Wrap. ...
The Cart Fan (DTS-CFAN) should fit securely in its mounting bracket but still be fairly easy to remove. For instance, when placed properly in the center bracket on the mounting plate, the attachment should be secure enough that you could lift the dy...
The Cart Fan (DTS-CFAN) was announced in January 2024 and started shipping from the Vernier offices in May 2024. It appears that some of the early Cart Fan units did not have the propeller properly seated on the motor shaft. In this poor position, t...
Starting with a batch of GDX-VPG in October 2024, we are using that marking to indicate that the sensor was a "give away" to visiting teachers. In the case of the GDX-VPG, these photogates are perfectly good for most uses, but the acceleration they ...