When you select the Hang Time and/or Jump Height channels for your Go Direct Force Plate, Graphical Analysis will provide a value for each selected channel when a student performs a jump.
Hang time produces the time an individual is in the air,...
Some Go Direct® Radiation Monitor (GDX-RAD) units (shipped in 2022 and 2023) contain a manufacturing error that limits the maximum count rate when monitoring active (>500 counts per minute) radiation sources. Lower count rates do not appear...
Yes! Below are some best practices to follow when making these files.
Use only Supported Go Direct sensors as this does not work for Generally or Minimally Supported sensors. See Which Go Direct sensors work with the TI-Nspire DataQuest App?
...
The most likely cause is related to the value used as the zero-offset. The zero-offset value DataQuest App applies is the meter value shown at the time the meter is clicked to access the Meter Settings dialog. Changes to the sensor reading while the...
Yes. However, this will cause your TI-Nspire calculator battery to drain faster.Extending the time for a calculator to APD is useful when collecting data using Go Direct Sensors. Bluetooth sensor connections and user-defined data collection paramete...
Because of the way the DataQuest App assigns trace colors to columns, the trace colors for the three Go Direct Light and Color Sensor's color sensor channels (615, 525, and 464) will generally not match the wavelength colors (red, green, and blue). ...
This may be because your calculator is attempting to charge the connected Go Direct sensor.While the following options can be used to collect data using a Go Direct Sensor via USB, you should expect the sensor to drain the calculator's battery quick...
Go Direct sensor calibration is not supported in the TI-Nspire DataQuest App. The DataQuest App applies the most recent sensor calibration when the sensor is connected to the calculator. If your sensor needs calibration, you must use our Graphical A...
The table below highlights the differences in TI-Nspire DataQuest App's functionality or behavior with Go Direct sensors when using a USB connection vs. a Bluetooth connection.
connected via USBconnected via BluetoothRequired for connection to th...
A bug in the TI Bluetooth Adapter firmware (v1.1.0) causes periodic near-zero sensor readings that, when plotted, give the appearance that the graph is shaded.
Data for sensors having multiple sensor channels (e.g., Go Direct Force and Acc...