Short answer: no.
In order to use the video sync feature in Graphical Analysis Pro the data must be collected in Graphical Analysis. Data collected on a TI calculator, manually entered data, and data from .csv files do not have the appropriate ta...
Because the Hang time and Jump Height channels on the Go Direct® Force Plate (GDX-FP) are asynchronus the program must wait for a period of time after data collection is completed to ensure it has all the necessary data.
You can collect Hang...
The Activity Based Physics High School e-dition setup files are for Logger Pro.For information about using Graphical Analysis Pro, see Can the RealTime Physics labs be done using Vernier Graphical Analysis Pro?.
The Activity Based Physics High ...
These instructions are for IT professionals to assist with pushing Vernier Progressive Web Apps (PWAs) to managed ChromeOS devices.
Currently Graphical Analysis, Vernier Video Analysis, Spectral Analysis, and Instrumental Analysis are available ...
Yes. Installing a Progressive Web App (PWA) on a Chromebook can make it easier to access.
Installing the Web App
In the Chrome browser, enter URL of the app you wish to install.
Graphical Analysis — https://graphicalanalysis.app
S...
Yes. Use the link below to access the files. The files work with any motion detector and can even be used with a Go Direct Sensor Cart. The files were made using Graphical Analysis Pro (v6.2.0). You will need to update to v6.2.0 (or newer); however,...
When you select the Hang Time and/or Jump Height channels for your Go Direct Force Plate, Graphical Analysis will provide a value for each selected channel when a student performs a jump.
Hang time produces the time an individual is in the air,...
Some Go Direct® Radiation Monitor (GDX-RAD) units (shipped in 2022 and 2023) contain a manufacturing error that limits the maximum count rate when monitoring active (>500 counts per minute) radiation sources. Lower count rates do not appear...
Yes! Below are some best practices to follow when making these files.
Use only Supported Go Direct sensors as this does not work for Generally or Minimally Supported sensors. See Which Go Direct sensors work with the TI-Nspire DataQuest App?
...
The most likely cause is related to the value used as the zero-offset. The zero-offset value DataQuest App applies is the meter value shown at the time the meter is clicked to access the Meter Settings dialog. Changes to the sensor reading while the...