Basic Information
What is needed to use Go Direct sensors with the TI-Nspire DataQuest App?
Which Go Direct sensors work with the TI-Nspire DataQuest App?
DataQuest App vs. GA―What's different when using GDX sensors?
Troubleshoot...
The Cart Fan (DTS-CFAN) includes a 3.7 V 2600 mAh rechargeable battery. With normal use, this battery should operate for several years before requiring replacement. The Cart Fan Replacement Battery (DTS-CFAN-BAT) is the correct replacement battery.
...
Supported (Maximum sample rate 200 Hz; no sensor calibration)
Go Direct® Force and Acceleration Sensor (GDX-FOR)
Go Direct® Gas Pressure Sensor (GDX-GP)
Go Direct® Light and Color Sensor (GDX-LC)
Go Direct® Motion Detect...
What You Need
1. TI-Nspire CX II or TI-Nspire CX II CAS handheld running OS version 6.2.0 (or newer)
Only TI-Nspire CX II or TI-Nspire CX II CAS handhelds 1 running OS version 6.2.0 (or newer) support using Go Direct sensors with the DataQue...
Go Direct® Salinity Sensor (GDX-SAL)Specifications and User Guide
TROUBLESHOOTING-Primary Test: Connect the sensor and start up the data-collection program. Place the sensor in distilled water. The reading should be at or near 0 ppt. Place th...
For new Force plates and new calculators the answer is most likely NO.
Whether or not a force plate works with a TI calculator depends on three things: the version of the sensor, the interface required, and whether or not your calculator supports...
As the Cart Fan (DTS-CFAN) is operated, its battery level decreases. The Cart Fan firmware includes code that maintains the fan thrust as the battery level changes. If the Cart Fan determines that the selected thrust cannot be maintained given the ...
If your Cart Fan (DTS-CFAN) does not turn on when you press the Start/Stop button, check the following:
Does the Cart Fan need to charge? Try plugging it in power. If the charging LED turns on, it is likely that it is just low on battery and nee...
Cart Fan (DTS-CFAN)Specifications and User Guide
TROUBLESHOOTING– Primary Test: Press the Start/Stop button. The fan should turn on. Select a thrust level using the Selection button and press the Start/Stop button. The Thrust/Duration Indicator...
Vernier does not sell holders or storage racks for our oxygen gas sensors. But the shaft of both the Go Direct O2 Gas Sensor and the O2 Gas Sensor can be placed in 50 mL conical tubes, which can also be called a 50 mL centrifuge tube. This means tha...