Collecting data with the DataQuest App For TI-Nspire CXII, CX, Touchpad and Clickpad handhelds and computer software, you will use the Vernier DataQuest App. This......
The , is supported by the TI-Nspire Lab Cradle, but only if the correct cable is used. Until June 2011, DRMs were shipped with a......
Yes. However, in the TI-Nspire software v3.0, two-point calibration of an ISE is broken. When calibrating using a computer, the calibration values will be wrong.......
There is no printed manual for the DataQuest application. Instead, Texas Instruments has incorporated online-help topics in the software. Additionally, the link below includes excerpts......
Handhelds Using multiple Lab Cradles or EasyLinks on a TI-Nspire handheld is generally not possible and not recommended. Computers The TI-Nspire software does not support......
EasyTemp (or Go!Temp) – No EasyLink (or Go!Link) – No CBR 2 (or Go!Motion) – Requires Special Cable not included with sensor The Lab Cradle......
In general, we do not recommend the use of USB-direct sensors (EasyTemp/Go!Temp, CBR2/Go!Motion) or interfaces (EasyLink/Go!Link) while using the Lab Cradle. This combination of data......