79 results for "CBR 2"

• Can I use a CBR 2 with a TI-89 Titanium? - Technical ...

  The CBR 2 can work with the TI-89 Titanium through the I/O port of the CBR. It does not work through the USB port on the calculator. For a calculator program, you will need the Ranger program. Please contact Vernier for a copy of the Ranger program.

  https://www.vernier.com/til/1475

• Can I connect an EasyTemp, EasyLink or CBR 2 directly to a ...

  EasyTemp (or Go!Temp) – No EasyLink (or Go!Link) – No CBR 2 (or Go!Motion) – Requires Special Cable not included with sensor The Lab Cradle...

  https://www.vernier.com/til/2406?keyword=cbr2

• Can I use my CBR2 with Logger Pro or LabQuest? - Technical ...

  Yes, the CBR 2 (CBR2) can also be connected to an original CBL, CBL 2, LabPro, LabQuest, LabQuest 2, LabQuest Mini, or LabQuest Stream using a Digital Sensor Cable (MDC-BTD). This cable is not provided with the CBR 2 because it is a TI product designed to be used with a calculator. The CBR 2 can also be connected to a USB port on a computer using a Go!Motion to Computer Cable (GMC-USB).

  https://www.vernier.com/til/3026

• Can I use a Go! device with my calculator or an Easy ...

  EasyTemp, EasyLink and CBR 2 devices are designed for use with the TI-84 Plus and TI-Nspire graphing calculators. As such they come equipped with USB Mini-A plugs to permit connection to the USB port on a the calculator.

  https://www.vernier.com/til/1469

• Why am I getting Motion Detector readings that are noisy ...

  CBR 2 (CBR2) Go Direct ® Motion Detector (GDX-MD) The maximum sample rate that you can use for the motion detector is 50 Hz, which equates to a sample interval of 0.02 seconds. Since the motion detector emits ultrasound and detects an echo, the speed of sound is a limiting factor in the use of the sensor.

  https://www.vernier.com/til/5

• What sensor data-collection app is used with TI-Nspire ...

  DataQuest App. DataQuest supports data collection, graph and tabular representation, and data analysis—all in a single TI-Nspire application. When used with the Vernier EasyLink (EZ-LINK) sensor interface, DataQuest supports 60 Vernier sensors. Additional sensors are supported when used with the TI-Nspire Lab Cradle (TI-NSLABC).

  https://www.vernier.com/til/5061

• Which motion detector should I buy? What are the ...

  cbr 2 (cbr2) If you want to connect a motion detector directly to your TI graphing calculator, without the use of an interface, the CBR 2 is the option for you. It connects directly to a TI-73 Explorer, TI-82, TI-83, TI-83 Plus, TI-84 Plus, TI-86, TI-89, TI-92, TI-92 Plus, TI-Nspire, TI-Nspire CAS, or TI Voyage 200 calculator.

  https://www.vernier.com/til/2996

• Can I do Graph Matching with my Motion Detectors and TI ...

  CBR 2 (CBR2) -or-Motion Detector (MD-BTD) and CBL 2 (CBL2) or LabPro DatMatch program For instructions on installing calculator apps and programs, see our App and Program Transfer Guidebook .

  https://www.vernier.com/til/2668

• Motion Detector Troubleshooting and FAQs - Technical ...

  CBR 2 (CBR2) Texas Instruments original CBR This motion detector is dark gray. It has a pivoting head with TI-82 and TI-85 buttons under the head. The sensor of the CBR is functionally identical to that in Motion Detector 1. Go Direct Motion Detector This motion detector is cubical in shape with no switch or swiveling head.

  https://www.vernier.com/til/1374

• TI SmartView Troubleshooting and FAQs - Technical ...

  TI-SmartView v5.2 or newer EasyTemp (EZ-TMP) (requires Easy to Go! Adapter (MINI-USB)) EasyLink (EZ-LINK) (requires Easy to Go! Adapter (MINI-USB)) CBR 2 (CBR2) (requires Go!Motion to Computer Cable (GMC-USB)) Go!Temp (GO-TEMP) Go!Link (GO-LINK) Go! Motion (GO-MOT) TI-SmartView v5.0 or 5.1

  https://www.vernier.com/til/3086

• Is there a way to calibrate the Motion Detector ...

  Since the speed of sound is temperature-dependent, motion readings will vary slightly by temperature. This is a very small correction, and is almost never important. When using a Go!Motion or Calculator Based Ranger (CBR 2) connected directly by USB cable, temperature compensation is automatic.

  https://www.vernier.com/til/2972

• What motion detector should I buy that will work with both ...

  The CBR 2 motion detector comes with the correct cables to connect to any TI graphing calculator including TI-84 Plus CE and TI-Nspire handhelds. The Go Motion USB cable would be used to connect the CBR 2 to a computer or Chromebook for data collection using TI-84 SmartView Emulator software, TI-Nspire Teacher software, TI-Nspire Student ...

  https://www.vernier.com/til/4362

• What data collection hardware works with TI-Nspire ...

  TI CBR 2 or Go!Motion. Sensor Interfaces TI-Nspire Lab Cradle EasyLink or Go!Link. Sensors Accelerometers Low-g Accelerometer 25-g Accelerometer 3-Axis Accelerometer* Anemometer Barometer Blood Pressure Sensor Charge Sensor CO2 Gas Sensor Colorimeter Conductivity Probe Current Sensors Current Probe High Current Probe Dissolved Oxygen Drop ...

  https://www.vernier.com/til/1718

• Which Vernier and Texas Instruments products are ...

  TI-Nspire Handheld with 84 Keypad ONLY (TI-84 OS version 2.44 or higher) CBL 2 (CBL2) LabPro – Handhelds do not fit in calculator cradles; EasyTemp (EZ-TMP) Go!Temp (GO-TEMP)-(requires adapter) CBR 2 (CBR2) Go! Motion (GO-MOT)-(requires adapter or USB cable) EasyLink (EZ-LINK) Go!Link (GO-LINK)-(requires adapter) Original CBL; Original CBR ...

  https://www.vernier.com/til/1721

• Go Direct Motion Troubleshooting and FAQs - Technical ...

  – Test 2: If the Motion Detector is not working when connected by USB, it may be the cable that is bad and not the sensor. Try a cable from a working unit. – Test 3: To test accuracy, find a wall with no desks, chairs, doors, or other obstructions within a 2 m field.

  https://www.vernier.com/til/4112

• Which Motion Detector model do I have? - Technical ...

  CBR 2 (CBR2) It started shipping in 2005. White and gray plastic with mode switch under the pivoting head. The CBR2 is functionally identical to the Go!Motion. The only difference is the branding and the cables that are included in the package. It normally shipped with two cables. One was a calculator link cable to connect it to a TI calculator.

  https://www.vernier.com/til/3269

• Texas Instruments (TI) Troubleshooting and FAQs ...

  CBR 2 (CBR2) TI Connectivity Software. Conflicts between Graphical Analysis 3, Logger Pro 3, and TI Connect for Windows; Curricula. What sensors and accessories would I need to do the Forensics with Vernier activities using a TI calculator? Do you have any science experiments written for TI-Nspire technology?

  https://www.vernier.com/til/2562

• How do I use a computer or Chromebook with only USB-C ...

  LabQuest 2, LabQuest Stream, LabQuest Mini, original LabQuest: Mini USB-C Cable: LabPro: Full-size USB-B Cable not sold by Vernier** Go!Link, EasyLink* USB-A to USB-C Adapter not sold by Vernier** USB-only Motion Detectors: Go!Motion, CBR 2: Full-size USB-B Cable not sold by Vernier** USB-only Temperature Probes: Go!Temp, EasyTemp*

  https://www.vernier.com/til/3822

• What sensors and accessories would I need to do the ...

  CBR 2 (CBR2) EasyLink (EZ-LINK) Dual-Range Force Sensor (DFS-BTA) Colorimeter (COL-BTA) pH Sensor (PH-BTA) Conductivity Probe (CON-BTA) EasyTemp (EZ-TMP) The above products and accessories support 13 of the 14 activities in the book. The one unsupported activity (“Case 3-Name That Tune”) makes use of a microphone, which requires sampling ...

  https://www.vernier.com/til/1559

• A mass fell into my Motion Detector and dented the screen ...

  CBR 2 (CBR2) To avoid such damage, we recommend protecting the Motion Detector when doing simple harmonic motion experiments where weights are suspended over the sensor. A simple wire in-basket can be placed over the Motion Detector to protect the sensor without introducing interference.

  https://www.vernier.com/til/2655

• How do I calibrate a sensor in Logger Pro? - Technical ...

  In most cases it is not necessary to calibrate sensors; however, for optimum accuracy you may choose to perform a calibration. To perform any calibration, you will need one or more external references for your sensor.

  https://www.vernier.com/til/2341

• TI-Nspire Troubleshooting and FAQs - Technical Information ...

  Can I connect an EasyTemp, EasyLink or CBR 2 directly to a TI-Nspire Lab Cradle? Can I use two TI-Nspire Lab Cradles or two EasyLinks connected to the same TI-Nspire or computer? Is there a DataQuest User Manual? Can I use Vernier Photogates (VPG-BTD) with TI calculators? Why is the DataQuest Collect button grayed out on my TI-Nspire when I use ...

  https://www.vernier.com/til/1726

• What sensor data-collection app is used with TI-83/84 Plus ...

  Original CBR ; When EasyData is used with CBL 2, LabPro or EasyLink, it supports a wide range of our sensors, including pH, Oxygen Gas, and Dual-Range Force. EasyData 4.0 and 5.3. EasyData 2.4. Download EasyData. EasyData comes preloaded on TI-83/84 Plus graphing calculators. If EasyData is not on your calculator, you candownload it for free.

  https://www.vernier.com/til/5078

• Can I use Go! and Easy products at the same time as the TI ...

  In general, we do not recommend the use of USB-direct sensors (EasyTemp/Go!Temp, CBR2/Go!Motion) or interfaces (EasyLink/Go!Link) while using the Lab Cradle. This combination of data...

  https://www.vernier.com/til/2405

• Can I use two TI-Nspire Lab Cradles or two EasyLinks ...

  Handhelds Using multiple Lab Cradles or EasyLinks on a TI-Nspire handheld is generally not possible and not recommended. Computers The TI-Nspire software does not support multiple Lab Cradles connected to a computer. When a second Lab Cradle is connected to a computer, it will be ignored by the software.

  https://www.vernier.com/til/2407

• Should I get a Motion Detector or a CBR? - Technical ...

  If you are a science teacher and plan to use the LabPro or CBL 2 most of the time, you should consider the Motion Detector, as it is less expensive than the CBR. If you are going to share you Motion Detector with a math teacher, consider the CBR since both of you can use it either directly with a calculator or with a LabPro or CBL 2.

  https://www.vernier.com/til/318

• Go!Motion Troubleshooting and FAQs - Technical Information ...

  Why don't I get a freefall acceleration value of 9.8 m/s 2 when using a Motion Detector? My Motion Detector is not collecting data with DataMate and LabPro. My motion detector still reads 0.004 m after zeroing. How do I improve the results from a Motion Detector with an air track? A mass fell into my Motion Detector and dented the screen.

  https://www.vernier.com/til/2115

• CBLØ SYSTEM

  Important Texas Instruments makes no warranty, either expressed or implied, including but not limited to any implied warranties of merchantability

  https://www.vernier.com/til/wp-content/uploads/sites/2/2020/03/cbl-guide.pdf

• Why does the Import from TI Device in Logger Pro not show ...

  The subscript characters used to represent the calculator lists L 1, L 2, L 3, L 4, L 5, and L 6 may not display as expected in Logger Pro 3.8. The lists may be displayed out of order, and/or may have the subscript character represented by a square ( ) instead of a specific number. – Lists collected using a LabPro, CBR or CBL2 will be out of ...

  https://www.vernier.com/til/2072

• How do I set up LabQuest 3 to email data with a Gmail account?

  This information pertains to LabQuest 3. If you have a LabQuest 2, see this article. The original LabQuest does not support this feature. To set...

  http://www.vernier.com/til/8735/

• Why does my brand new LabQuest 3 battery not work?

  This information pertains to LabQuest 3. If you have a LabQuest 2, see this article. If you have an original LabQuest, see this article. To...

  http://www.vernier.com/til/8725/

• Do you have support for LabVIEW 2020?

  We provide LabVIEW support for many of our products. In some cases you will download our LabVIEW files and place them in your LabVIEW directory,...

  http://www.vernier.com/til/7636/

• How do you press the Keep button, during data collection, using Talking LabQuest 2?

  After talking with the people at Independence Science, we do not think there is a way to activate the Keep button, during Events with Entry...

  http://www.vernier.com/til/6523/

• How can I extend the useful life of my Vernier oxygen gas sensor?

  The useful life of Vernier oxygen gas sensors is dependent on how they are stored and how much oxygen they are exposed to over a...

  http://www.vernier.com/til/2588/

• Mini GC Plus Gas Chromatograph Troubleshooting and FAQs

  These specifications are for the Specifications and User Guide If you have the original Mini GC, the specifications are listed here: Specifications and User Guide...

  http://www.vernier.com/til/2841/

• My LabQuest 2 asks for a Linux login. What should I do?

  If this is what you see (in white or pale blue font) when you are updating your LabQuest 2 or turning it on: OpenedHand Linux...

  http://www.vernier.com/til/3051/

• LabQuest 2.6.2, 2.6.1 and 2.6 Release Notes

  LabQuest 2.6.2 • Improved system stability with networking LabQuest 2.6.1 • Improved system stability after reboot LabQuest 2.6 New Sensor Support • Platinum-Cell Conductivity Probe...

  http://www.vernier.com/til/3521/

• LabQuest 2.5.3 and 2.5 Release Notes

  LabQuest 2.5.3 • Addressed an issue related to the data acquisition (DAQ) software LabQuest 2.5 New Sensor Support • Vernier Structures & Materials Tester •...

  http://www.vernier.com/til/3373/

• Go Wireless Sensors - LabQuest Support Details

  LabQuest support for Go Wireless sensors FAQs Q: What LabQuest units can collect Go Wireless sensor data? A: LabQuest 2 and LabQuest 3. However, some...

  http://www.vernier.com/til/3134/

• How do I know if my LabQuest will work with Go Direct Sensors and Go Wireless devices?

  Only the , connected via USB can be used with the original LabQuest. All other Go Direct sensors are not supported. All models of LabQuest...

  http://www.vernier.com/til/3085/

• Are your apps supported in macOS 10.15 Catalina?

  macOS® 10.15 (also called Catalina) was released October 7, 2019. Logger Pro 3.16 is fully supported with the exception of video capture. Video analysis is...

  http://www.vernier.com/til/4441/

• How do I tell which model Go!Link I have?

  The Go!Link originally came out in 2004. As time went on some of the components we were using in the original design were no longer...

  http://www.vernier.com/til/4389/

• Do you have support for LabVIEW 2019?

  We provide LabVIEW support for many of our products. In some cases you will download our LabVIEW files and place them in your LabVIEW directory,...

  http://www.vernier.com/til/4494/

• macOS is warning me that Logger Pro is not 64 bit and therefore won't run on 10.15 Catalina

  If you are specifically seeing messages about Logger Pro not being 64 bit, that means you are running an older version of Logger Pro, and...

  http://www.vernier.com/til/4495/

• macOS gives a message on launch of Logger Pro that "Logger Pro has not been optimized for your Mac"

  Logger Pro 3.15 and earlier will generate an error message on computers running macOS 10.14.4 and later. The full text of the error message is...

  http://www.vernier.com/til/4386/

• Is there a user guide for Logger Pro 3?

  There are several ways to get help using Logger Pro 3. First, on our Product Manuals page, there is a quick start guide: http://www2.vernier.com/manuals/LP3QuickRefManual.pdf In...

  http://www.vernier.com/til/1207/

• Where can I get VPAT forms for Vernier products?

  Some school districts require the submission of the Voluntary Product Accessibility Template form for certain software products. Completed VPAT Forms for the Vernier products listed...

  http://www.vernier.com/til/3527/

• How do I find the MAC address of the LabQuest 2 or LabQuest 3?

  To find the MAC address on the LabQuest 2 or LabQuest 3, do the following: Open the Connections App LabQuest 2⚊Tap on the WiFi Icon....

  http://www.vernier.com/til/3544/

• LabQuest 2 or LabQuest 3 Wi-Fi username field is wrong and grayed out

  If you have a LabQuest 2 that was connected to a WPA2 Enterprise network where you enter a username/password, and either you mis-typed the username...

  http://www.vernier.com/til/4473/

• Networking for LabQuest 2 and LabQuest 3—FAQ and Troubleshooting

  This information pertains to LabQuest 2 and LabQuest 3. If you have an original LabQuest, see this article. INITIAL SETUP [til 2725] [til 2726] [til...

  http://www.vernier.com/til/2669/

• My school Wi-Fi requires a username and password (WPA2 Enterprise). Can LabQuest 2 or LabQuest 3 connect to this network?

  This information pertains to LabQuest 2 and LabQuest 3. If you have an original LabQuest, see this article. LabQuest 2 and LabQuest 3 support many...

  http://www.vernier.com/til/2665/

• Go Direct Oxygen Gas Troubleshooting and FAQs

  Specifications and User Guide TROUBLESHOOTING Primary Test: Blow on the sensor. Do you see a decrease in the Oxygen Gas reading? This tells you that...

  http://www.vernier.com/til/4127/

• Go Direct CO2 Troubleshooting and FAQs

  Specifications and User Guide TROUBLESHOOTING Note: These instructions are for the Go Direct CO2 Gas Sensor. For information regarding the , see [til 1366] -Primary...

  http://www.vernier.com/til/4128/

• What is the thread on the bumpers and hooks for Vernier Force Sensors?

  This article refers to the following sensors: The hooks and bumpers used with our various force sensors have a 6-32 thread. You can usually buy...

  http://www.vernier.com/til/1862/

• Why is Logger Pro/Logger Lite giving an error about mfc140u.dll or 0xc000007b?

  This is fixed in Logger Pro version 3.15, if you are running an older version of Logger Pro you should update to version 3.15 here:...

  http://www.vernier.com/til/4047/

• How can I update to new Vernier equipment and still make use of my old Vernier equipment?

  Below you will find a list of things to consider when upgrading your equipment. Each situation is different. If you need help figuring out which...

  http://www.vernier.com/til/1961/

• Where can I purchase a Go Direct Mini GC for non-educational purposes?

  Vernier only sells to educational institutions. For non-educational inquiries, please direct to: Louis Haerle President Seacoast Science,Inc. 2151 Las Palmas Drive Suite C Carlsbad, CA...

  http://www.vernier.com/til/4439/

• Why can't my device find Go Direct SpectroVis Plus Spectrophotometer when I try to connect via Bluetooth?

  Note: This document addresses a Go Direct SpectroVis Plus that will not connect at all to a device via Bluetooth wireless technology. If instead you...

  http://www.vernier.com/til/4118/

• How do I deter student access to various network settings in LabQuest 2 or LabQuest 3?

  There is a user preference in LabQuest 2 and LabQuest 3 to deter student access to naming, network, and connections settings. This is not a...

  http://www.vernier.com/til/3004/

• How can I move data collected on a LabQuest to Graphical Analysis 4 on a Chromebook if I can't use Wi-Fi?

  Data can be moved most easily from LabQuest 2 or LabQuest 3 to a Chromebook via Wi-Fi. Instructions can be found in [til 3467]. However,...

  http://www.vernier.com/til/4422/

• What is the shelf life of a new LabQuest replacement battery?

  This is really a difficult question to answer and will vary battery to battery. We can’t provide a specific shelf life for the batteries but...

  http://www.vernier.com/til/4421/

• How do I get an A260/A280 value with your UV-VIS spectrometers in Logger Pro?

  WHAT IS THE A260/A280 RATIO? This ratio is used to determine the purity of a DNA or protein sample. Contamination of a nucleic acid solution...

  http://www.vernier.com/til/2578/

• Do you have a spectrometer that can measure DNA concentration and purity?

  Yes, the and the can be used to assess DNA purity and concentration. DNA has an absorption maxima at approximately 260nm. At 260nm, an A260...

  http://www.vernier.com/til/1683/

• How is the temperature compensation calculated on my conductivity probe (CON-BTA)?

  The is automatically temperature compensated between temperatures of 5 and 35°C. Note that the temperature of a solution is being read by a thermistor that...

  http://www.vernier.com/til/2959/

• Vernier Circuit Board 2 Troubleshooting and FAQs

  Specifications and User Guide This article is about the Vernier Circuit Board 2, introduced in late 2015. Information about the original Vernier Circuit Board can...

  http://www.vernier.com/til/3490/

• Is there a way to connect my CO2 sensor to an NXT Mindstorm?

  (This information refers to the LEGO NXT robotics system. The information should be similar for LEGO EV3. However, this has not been tested.) There is...

  http://www.vernier.com/til/2236/

• What products do I need to buy to use TI-Navigator if my class size is not 10 or 30 students?

  TI-Navigator Systems come in 10-user and 30-user configurations. There is also a 10-User add-on option for supporting different class sizes. TI-Nspire Handhelds TI-Navigator Systems do...

  http://www.vernier.com/til/4392/

• How does a colorimeter compare to a spectrometer?

  A spectrophotometer can be set to measure % transmittance and/or absorbance over a wide range of wavelengths. Our Colorimeter can only measure four specific wavelengths...

  http://www.vernier.com/til/356/

• Why is my 2 volt solar panel putting out more than 3 volts?

  In early 2014, some KidWind kits included a 3V/200mA solar panel instead of a 2V/400mA panel. You can differentiate between the 2V/400mA and 3V/200mA solar...

  http://www.vernier.com/til/3266/

• What is the best light source to make solar panels work indoors?

  This article refers to experiments using the . We have recommended a load resistance for each light source listed below. Note that the recommendations are...

  http://www.vernier.com/til/3684/

• What can I do to reduce the error in Physics with Vernier Experiment 9, Newton's 2nd Law?

  1. Make sure you have zeroed the sensors, and that the sensors were in the same position when zeroed as when the experiment starts. 2....

  http://www.vernier.com/til/1153/

• Which motion detector should I buy? What are the differences between them?

  We sell multiple motion detectors. The motion detectors we sell are very similar and use the same ultrasonic technology. The choice of which to buy...

  http://www.vernier.com/til/2996/

• What motion detector should I buy that will work with both calculators and computers/Chromebooks?

  If you need a motion detector that works with both Texas Instruments calculators as well as computers or Chromebooks, you should purchase the following: The...

  http://www.vernier.com/til/4362/

• Which TI-Nspire Handhelds work with the TI-Nspire Rechargeable Battery

  TI-Nspire CX II and TI-Nspire CX II CAS rechargeable battery included handheld uses TI battery w/o wire TI-Nspire CX and TI-Nspire CX CAS rechargeable battery...

  http://www.vernier.com/til/2164/

• What is the difference between TI-Nspire CX II, CX, Touchpad, and Clickpad handhelds?

  2007 – Texas Instruments introduced the TI-Nspire handhelds (now called Clickpad handhelds) as their next generation graphing calculator. 2010 – TI introduced the Touchpad version...

  http://www.vernier.com/til/2162/

• How do I remove or replace a Go Direct battery?

  Batteries for Go Direct® sensors can be replaced by following the step-by-step instructions in the below videos. Most sensors fit into either a “wand” type...

  http://www.vernier.com/til/4014/

• How do I determine the type of ProScope I have?

  You can determine the model of the ProScope that you have by looking at the color of the base. If the body is white, then...

  http://www.vernier.com/til/2355/

• Do you sell additional terminal blocks for the Sensor DAQ?

  Vernier does not sell the SensorDAQ screw terminal. You can purchase these from various electronic stores. One example that we know works is available from...

  http://www.vernier.com/til/3993/

• My power supply is making noise. Is that bad?

  Some power supplies may make a high-pitched sound when connected and in use. This is not dangerous, only a sign that the coils or capacitors...

  http://www.vernier.com/til/4354/

• CBR 2