80 results for "Go Wireless Charging Cable"

• Go Wireless pH Troubleshooting and FAQs - Technical ...

  – Go Wireless ® Charging Cable (GW-CB) – Go Direct® pH BNC Electrode (GDX-PH-BNC) – Go Direct ® Electrode Amplifier (GDX-EA) – Go Wireless® 100 mAh Replacement Battery (GW-BAT-100) – pH Buffer Capsule Kit (PH-BUFCAP) – pH Storage Solution (PH-SS) RELATED VERNIER PRODUCTS – Go Wireless ® Charging Station (GW-CRG, discontinued)

  https://www.vernier.com/til/3272

• Go Wireless Link Troubleshooting and FAQs

  Note the Go Wireless Link is not waterproof, do not immerse the interface in water. Interface dimensions – length 8.0 cm, maximum width 3.2 cm, minimum width 2.2 cm. REPLACEMENT PARTS – Go Wireless ® Charging Cable (GW-CB) – Go Wireless ® Link (interface only) (GW-LINK-NP, discontinued) – Go Wireless® 250 mAh Replacement Battery (GW ...

  https://www.vernier.com/til/3473

• Go Wireless Temp - Data Collection Details - Technical ...

  A: The Go Wireless Temp probe does not log data offline so it cannot be used to collect data this way. Q: Can I collect data while the battery is charging? A: Yes, charging does not interfere with data collection. Q: Can I collect data “wired” to a computer using the charging cable? A: No, the charging cable will only charge the unit.

  https://www.vernier.com/til/3135

• Go Wireless Temp Troubleshooting and FAQs

  Go Wireless ® Temp (GW-TEMP, discontinued) Specifications and User Guide. TROUBLESHOOTING Primary Test: Press the power button on the sensor to turn it on. (The red LED will be flashing.)

  https://www.vernier.com/til/3121

• How do I remove or replace a Go Wireless pH or Go Wireless ...

  After the unit turns on, verify the charging circuit works by connecting the sensor to a charging station or cable. The blue charge light should illuminate when the sensor is connected to power. If it does not, the charging clips may be bent bent or broken. Attach an electrode to the Go Wireless Electrode Amplifier and continuing using your sensor.

  https://www.vernier.com/til/3675

• How do I remove or replace a Go Wireless Link battery?

  Follow these instructions to remove or replace a , in your Go Wireless Link. Follow these instructions carefully as PERMANENT DAMAGE can result if not...

  https://www.vernier.com/til/3676?keyword=circuit

• Go Wireless sensors - battery details - Technical ...

  Below are some frequently asked questions regarding the battery for Go Wireless sensors. Q: Is there a way to tell the status of the battery? A: See the below information for your specific application. Go Wireless app or Graphical Analysis (v2.0 or newer) for iPad, iPhone, and iPod touch 1. Press the power button on Go Wireless sensor to turn ...

  https://www.vernier.com/til/3136

• Go Direct Sensor Cart Troubleshooting and FAQs - Technical ...

  Go Direct Sensor Cart is available in green and yellow in order to facilitate classroom discussions about collisions. The two colors are designed to be distinguishable by many color-blind viewers. Data column names have a suffix of “Y” or “G” so that you can tell the carts apart in a data table.

  https://www.vernier.com/til/4131

• LabQuest 2 FAQs - Technical Information Library

  How many wireless devices can I connect to at the same time on a LabQuest 2 or LabQuest 3? Battery and Power. LabQuest 2 Battery Troubleshooting and FAQs; I have trouble getting my LabQuest 2 to turn on/start up. (flowchart) Will my LabQuest Charging Station also work with the LabQuest 2 and LabQuest Stream? My brand new LabQuest 2 battery ...

  https://www.vernier.com/til/2694

• My calculator will not turn on. - Technical Information ...

  Connect the TI Connectivity cable between the PC and calculator (this cable was not included with TI-83 Plus calculators). The calculator will automatically turn on when the TI Connectivity Cable is inserted. On your computer, drag and drop the OS file on the TI Connect icon to initiate the file transfer.

  https://www.vernier.com/til/1236

• Data Collection with Go Wireless pH/Electrode Amplifier ...

  A: The Go Wireless pH probe does not log data offline. Q: Can I collect data while the battery is charging? A: Yes, charging does not interfere with data collection. Q: Can I collect data “wired” to a computer using the charging cable? A: No, the charging cable will only charge the unit. There is no sensor data communication via this cable.

  https://www.vernier.com/til/3375

• What (replacement) power supply should I buy for my ...

  Using the correct power supply will ensure the equipment is receiving the correct voltage, adequate current, and (importantly) the correct polarity. Interfaces uses the ....

  https://www.vernier.com/til/9618

• Logger Pro Troubleshooting and FAQs - Technical ...

  I updated Logger Pro and no longer can connect to my Go Wireless Temp Logger Pro shows only a white space where the graph should be. Windows: Why does Logger Pro hang, crash, or take several minutes to come up when I start it? Why does Logger Pro 3 (or Logger Lite) crash right after it opens? Logger Pro 3.7 crashes when I update my LabPro OS.

  https://www.vernier.com/til/2089

• Go Direct 3-Axis Magnetic Field Sensor Troubleshooting and ...

  Go Direct 3-Axis Magnetic Field uses Bluetooth low energy technology and can only be used wirelessly with devices that support Bluetooth low energy technology running the appropriate software. Otherwise, connect the sensor to your device using the included USB cable.

  https://www.vernier.com/til/3942

• Connection Instructions for Spectrometers - Technical ...

  When using a Go Direct SpectroVis Plus. Do not connect the power supply, it is not needed when connecting via USB. It is recommended that you remove the battery when connecting via USB. Launch Spectral Analysis. The app will identify the spectrometer and load a default data-collection setup. You are now ready to continue your experiment.

  https://www.vernier.com/til/5939

• Why is it that some micro USB cables do not work with my ...

  Some micro USB cables are made only for charging devices and are not wired for communication. These are often included in electronic devices that are charged via a micro USB cable (such as a Kindle). Many of these “charging only” cables are very short. There does not seem to be an easy way to identify one of these cables other than just ...

  https://www.vernier.com/til/4094

• Can I connect an EasyTemp, EasyLink or CBR 2 directly to a ...

  EasyTemp (or Go!Temp) – No EasyLink (or Go!Link) – No CBR 2 (or Go!Motion) – Requires Special Cable not included with sensor The Lab Cradle...

  https://www.vernier.com/til/2406?keyword=mini-usb

• Go Direct Motion Troubleshooting and FAQs - Technical ...

  Go Direct ® Motion Detector ... – Test 2: If the Motion Detector is not working when connected by USB, it may be the cable that is bad and not the sensor. Try a cable from a working unit. – Test 3: To test accuracy, find a wall with no desks, chairs, doors, or other obstructions within a 2 m field. Hold the motion detector in your hand, 0 ...

  https://www.vernier.com/til/4112

• How do I use a computer or Chromebook with only USB-C ...

  Whenever possible, we recommend using a USB-C cable rather than an adapter. Vernier products come with cables utilizing USB-A for connection to computers and Chromebooks and, in some instances, charging. USB-C cables are sold separately. We offer the following USB-C cables for use with our products USB products: Mini USB-C Cable (CB-USB-C-MINI)

  https://www.vernier.com/til/3822

• Why can't my device find Go Direct SpectroVis Plus ...

  Note: This document addresses a Go Direct SpectroVis Plus that will not connect at all to a device via Bluetooth wireless technology.If instead you are experiencing intermittent Bluetooth connections with a Go Direct SpectroVis Plus, see: My Go Direct SpectroVis Plus Spectrophotometer intermittently drops the connection while using Bluetooth.

  https://www.vernier.com/til/4118

• Go Direct Light and Color Sensor Troubleshooting and FAQs ...

  Go Direct Force and Acceleration Sensor uses Bluetooth low energy technology and can only be used wirelessly with devices that support Bluetooth low energy technology running the appropriate software. Otherwise, connect the sensor to your device using the included USB cable.

  https://www.vernier.com/til/3966

• Go Direct Acceleration Troubleshooting and FAQs ...

  Go Direct ® Acceleration Sensor (GDX-ACC) Specifications and User Guide. TROUBLESHOOTING Primary Test: Press the power button on the sensor to turn it on. (The red LED should flash.) Start the Graphical Analysis app on your device and select the sensor from the list of available sensors.

  https://www.vernier.com/til/4083

• How do I connect my Davis Weather station to the internet ...

  Davis Vantage Pro2 Plus Wireless Weather Station (DWPLUS) All of these weather stations also include a console that can display data in your room. If you do not need that console display, you can even get by with just Davis WeatherLink Live (DWL-LIVE) and Davis Vantage Vue Wireless Integrated Sensor Suite (DWVUE-ISS).

  https://www.vernier.com/til/2008

• Go Direct Temperature Probe Troubleshooting and FAQs ...

  What is the difference between a Go Wireless sensor and a Go Direct sensor? Go Direct Temperature sensor reports a constant value. Probe dimensions – Overall length (handle + shaft): 18.5 cm – Stainless steel shaft: length 11.5 cm, diameter 4.7 mm – Probe handle: length 7 cm, maximum width 3.5 cm, depth 2 cm. CALIBRATION

  https://www.vernier.com/til/3986

• Go Direct Respiration Belt Troubleshooting and FAQs ...

  Go Direct Respiration Belt uses Bluetooth low energy technology and can only be used wirelessly with devices that support Bluetooth low energy technology running the appropriate software. Otherwise, connect the sensor to your device using the included USB cable.

  https://www.vernier.com/til/4066

• My school is moving to Chromebooks. Will the probeware I ...

  The Go Wireless Link is not compatible with Chromebooks. Unfortunately, the only “Go Wireless” products that work with Chromebooks are the Go Wireless Heart Rate and Go Wireless Exercise Heart Rate Monitors. ... We sell USB C cables separately. Details are at: How do I use Vernier USB products with a computer or Chromebook having only USB-C ...

  https://www.vernier.com/til/2871

• Motion Detector Troubleshooting and FAQs - Technical ...

  It is interchangeable with the Go!Motion. It connects directly to a Texas Instruments graphing calculator via mini-USB cable. For use with a computer, the optional Go!Motion USB cable is needed. 4-AA Batteries (included) are required when using this with a calculator. CBR 2 (CBR2) Texas Instruments original CBR This motion detector is dark gray.

  https://www.vernier.com/til/1374

• How does LabQuest 3 compare to LabQuest 2? - Technical ...

  Charging station / Serial port ; NEW Micro USB port for computer connectivity Included Micro USB Cable (CB-USB-MICRO) NEW Higher capacity battery (24.42 vs. 12.21 Watt·hours) Higher current AC adapter (2500 vs. 1500 mA) Internal Sensors—GPS and Microphone only

  https://www.vernier.com/til/8373

• Stainless Steel Temperature Probe Troubleshooting and FAQs ...

  1- Twisting the cable: Sometimes students twist or crimp the wire near the handle of the sensor. Over time, this can cause the wires to come loose and make the sensor stop working. 2- Overheating: Measuring the temperature of a flame or the surface of a hot plate will damage the sensor.

  https://www.vernier.com/til/1392

• What should I do if my Davis Weather station has stopped ...

  Go to a computer that has the Weatherlink software installed on it and connected to the same router as the station console. Open Weatherlink. Go to the top of the program and click ‘setup’, then ‘communications port’. On the next screen, select ‘TCP/IP’. Then go below, and select the line that says ‘local device ID’. Click ...

  https://www.vernier.com/til/3817

• Go Direct Mini GC Compound Library

  Sample Chromatogram Chemical and Parameters Methanol Volume (µL): 0.3Start Temp (℃): 40 Hold Time (min): 1Ramp Rate (℃/min): 10Final Temp (℃): 60Hold Time (min): 5Pressure...

  http://www.vernier.com/til/7788/

• My school is moving to iPad. Will the probeware I already own work with an iPad?

  As schools move to new technology platforms, many teachers have asked us for advice on how to make the most cost effective use of probeware...

  http://www.vernier.com/til/7711/

• How do I get OpenSciEd curriculum?

  To use Vernier technology with the OpenSciEd curriculum, you need to A) download the complete unit from OpenSciEd B) download the Vernier supplement The Vernier...

  http://www.vernier.com/til/4568/

• Why is my VSMT force sensor stuck at 1000 N?

  There are at least two possible causes for the force sensor to read a high constant value. It has been stressed beyond its capacity and...

  http://www.vernier.com/til/3463/

• How do I know if my LabQuest will work with Go Direct Sensors and Go Wireless devices?

  Only the , connected via USB can be used with the original LabQuest. All other Go Direct sensors are not supported. All models of LabQuest...

  http://www.vernier.com/til/3085/

• How does Logger Pro calculate velocity and acceleration from Motion Detector data?

  This information pertains to data collected using any of our ultrasonic motion detectors, rotary motion sensors, the Motion Encoder System, and the Go Direct Sensor...

  http://www.vernier.com/til/1011/

• How do I tell which model Go!Link I have?

  The Go!Link originally came out in 2004. As time went on some of the components we were using in the original design were no longer...

  http://www.vernier.com/til/4389/

• What do you recommend to replace the WDSS?

  The Wireless Dynamic Sensor System was discontinued in 2019 because certain parts were no longer available. This multisensor included a 3-axis accelerometer, a force sensor,...

  http://www.vernier.com/til/4498/

• Problems with force sensor giving bad readings because hex barrel has been removed and improperly reinstalled.

  This article refers to the following products: All three of these sensors have a hexagonal barrel, or standoff, extending from the sensor case. This part...

  http://www.vernier.com/til/2149/

• Graphical Analysis 4 Bluetooth issues on Windows 10: Do I need to pair?

  If your Go Direct sensor works on Windows 10 via USB, but you are having issues connecting via Bluetooth wireless technology, the first thing you...

  http://www.vernier.com/til/4053/

• Graphical Analysis or Spectral Analysis launches on my Chromebook but won't connect to USB devices.

  When using a Chromebook, make you are using the Chrome version of the app. Many Chromebooks are able to run Android apps from the Google...

  http://www.vernier.com/til/4359/

• Go Wireless Temp cannot be used with Windows 10 Creators Update and Logger Pro

  On April 11, 2017, Microsoft released a major update to Windows 10. Called the Creator’s Update, the build number is 15063. This new version of...

  http://www.vernier.com/til/3960/

• WDSS Troubleshooting and FAQs

  Specifications and User Guide TROUBLESHOOTING Primary Test: There is extensive information on installing Bluetooth radios and establishing radio communications with WDSS, see [til 4429] Secondary...

  http://www.vernier.com/til/1554/

• How do I share data from Graphical Analysis 4?

  Graphical Analysis 4 data files can be saved from within the application as files with an .ambl extension. From there, files can be shared with...

  http://www.vernier.com/til/3771/

• How can I create FFTs using the Go Direct Sound Sensor (GDX-SND)?

  , can capture waveforms using its Microphone channel, but currently Graphical Analysis 4 will not yet create FFTs. If you have a Go Direct Sound...

  http://www.vernier.com/til/4302/

• What programming environments do you support for using your sensors for projects and teaching coding?

  Since we started this company in the early 1980’s, we have always tried to provide a way for teachers and students to “do their own...

  http://www.vernier.com/til/4307/

• Vernier Structures & Materials Tester (VSMT) Troubleshooting and FAQs

  Specifications and User Guide TROUBLESHOOTING – Primary Test: The VSMT Force sensor will auto-ID with supported releases of software. – Secondary Test: The VSMT Displacement...

  http://www.vernier.com/til/3344/

• Can I use Vernier Go Direct sensors with non-Vernier software?

  Yes, Vernier Go Direct sensors can connect to a few select applications besides Vernier Graphical Analysis 4. Additionally, you can connect to and collect data...

  http://www.vernier.com/til/4440/

• How to I set up my Raspberry Pi to use GDX sensor with Python?

  The Vernier Go Direct Python library can be installed and used on a Raspberry Pi. It can be installing by doing the following. Install the...

  http://www.vernier.com/til/4445/

• Do Vernier apps run in Windows 10 S?

  No. Windows 10 has an “S” mode that restricts what apps can be installed. Schools may opt to run Windows 10 only in S Mode,...

  http://www.vernier.com/til/4446/

• My school is moving to Chromebooks. Will the probeware I already own work with a Chromebook?

  As schools move to new technology platforms, many teachers have asked us for advice on how to make the most cost effective use of probeware...

  http://www.vernier.com/til/2871/

• Do you have data-collection technology that works with Google Chromebooks?

  Yes, Graphical Analysis 4, our data-collection and analysis application available for Chromebooks, is free and available for Download in the Chrome Web Store. Data collection...

  http://www.vernier.com/til/2453/

• My Go Direct SpectroVis Plus Spectrophotometer intermittently drops the connection while using Bluetooth.

  Note: This document addresses intermittent Bluetooth connections. If you are unable to connect at all by Bluetooth see:      [til 4118] If your successfully connects to...

  http://www.vernier.com/til/4425/

• How do I use the Moment of Inertia Kit with the original CFA?

  You can collect angular velocity data using the attached to the beam of the . However, you must use a photogate to collect angular velocity...

  http://www.vernier.com/til/4428/

• Can I use Vernier sensors with LEGO MINDSTORMS EV3?

  The provides the ability to connect certain Vernier LabQuest analog sensors directly to the EV3 robotics brick. This allows you to program your EV3 robot...

  http://www.vernier.com/til/4380/

• Can I do data logging using MINDSTORMS EV3 software?

  Yes. There are several different options for logging data with the EV3 using MINDSTORMS software. Here are the various data logging options: 1. Live Data...

  http://www.vernier.com/til/3569/

• Go!Link Troubleshooting and FAQs

  Product Overview [til 1908] [til 1901] [til 1469] [til 1514] [til 2107] [til 2625] [til 2871] [til 1961] [til 1721] [til 2063] Troubleshooting The LED...

  http://www.vernier.com/til/2114/

• LEGO® Mindstorms® EV3 Troubleshooting and FAQs

  LEGO® Mindstorms® EV3 units are able to work with Vernier sensors using our LEGO Sensor Adapter for EV3 and NXT (order code: BTA-NXT, $39) and...

  http://www.vernier.com/til/3339/

• How can I zero the sensor readings on my EV3?

  The Vernier Sensor Block for MINDSTORMS EV3 software does not have a Zero function. You can easily create a correction in your program to effectively...

  http://www.vernier.com/til/3608/

• Why does Port View indicate I have plugged in an NXT Sound Sensor when I have a Vernier sensor connected?

  The EV3 was designed to automatically identify EV3 and NXT LEGO sensors that have been connected to any of its input ports. Unfortunately, it does...

  http://www.vernier.com/til/3607/

• When I use the Vernier EV3 Sensor Block why is there an exclamation point above the port number?

  The exclamation is simply a notification that you have connected a non-LEGO® sensor into one of the EV3 ports. It does not interfere with the...

  http://www.vernier.com/til/3606/

• Why don't I see the Vernier Sensor block in my MINDSTORMS EV3 Sensor palette?

  You need to import the Vernier Sensor Block into MINDSTORMS. For instructions for downloading the Sensor Block, go to this web page: https://www.vernier.com/engineering/lego-ev3/ev3-sensor-block/ [til 3339]

  http://www.vernier.com/til/3605/

• How do I get the sensor reading from the Vernier EV3 Sensor block connected to the Display block?

  To display a sensor reading on the screen of the EV3, you must configure the Display block to allow sensor readings to be wired as...

  http://www.vernier.com/til/3604/

• What can I do to make my Vernier sensor readings more steady in my EV3 program?

  The Vernier sensor block for LEGO MINDSTORMS EV3 includes an option for oversampling. Oversampling takes a large number of samples and returns an averaged reading....

  http://www.vernier.com/til/3603/

• My Vernier sensor does not seem to work with my EV3 LEGO Robot. How do I troubleshoot this?

  The following are a series of troubleshooting steps that should help you find the issue: 1. Check to verify that your EV3 is on. Periodically,...

  http://www.vernier.com/til/3602/

• My LEGO EV3 program is not working. How do I start troubleshooting?

  In most cases, the LEGO EV3 program does exactly what you have programmed it to do. If you are having trouble, follow these troubleshooting steps:...

  http://www.vernier.com/til/3601/

• Why are certain sensors not able to work with the NXT Adapter?

  The answer depends on the sensor: First of all, only sensors with the BTA connector can work with this adapter. This eliminates all the BTD,...

  http://www.vernier.com/til/2585/

• Is there a way to connect my CO2 sensor to an NXT Mindstorm?

  (This information refers to the LEGO NXT robotics system. The information should be similar for LEGO EV3. However, this has not been tested.) There is...

  http://www.vernier.com/til/2236/

• Why does my LEGO solar tracker only move in one direction?

  There are two issues that may cause this to happen. 1. The reading from the is not centered around zero (0). You can determine this...

  http://www.vernier.com/til/3432/

• Scratch and Go! FAQs and Troubleshooting

  Scratch is a free, browser-based programming language that is designed for students ages 8 to 16, and it is supported by an active community of...

  http://www.vernier.com/til/3764/

• Which sensors can I use with Graphical Analysis 4 and Graphical Analysis GW on Android devices?

  We encourage you to use Graphical Analysis 4 whenever possible; however, support for some devices is not yet included in this application. Use the information...

  http://www.vernier.com/til/4190/

• Why am I getting Motion Detector readings that are noisy or max out at a certain distance?

  The following tips for Motion Detectors apply to all of the following products: The maximum sample rate that you can use for the motion detector...

  http://www.vernier.com/til/5/

• Can I use Vernier sensors with LEGO MINDSTORMS NXT?

  Yes, you can connect Vernier sensors to a LEGO NXT or EV3 (the EV3 is LEGO’s newer model robot platform, the NXT is the older...

  http://www.vernier.com/til/4376/

• What Bluetooth radio do I need for Go Direct Sensors and Python?

  To connect to your Go Direct device to Python via Bluetooth® wireless technology, you will need a Bluegiga BLED112 Bluetooth® Low Energy Dongle. https://www.silabs.com/products/wireless/bluetooth/bluetooth-low-energy-modules/bled112-bluetooth-smart-dongle Related...

  http://www.vernier.com/til/4370/

• Should I buy EasyTemp or Go!Temp to work with both Texas Instruments calculators and computers/Chromebooks?

  Because of the lower overall cost, we recommend you purchase the following:           The Go!Temp cable has a standard USB connector for connecting to a computer...

  http://www.vernier.com/til/4364/

• Should I buy EasyLink or Go!Link to work with both Texas Instruments calculators and computers/Chromebooks?

  Because of the lower overall cost, we recommend you purchase the following:             The Go!Link has a 1 m cable with a standard USB...

  http://www.vernier.com/til/4363/

• Which motion detector should I buy? What are the differences between them?

  We sell multiple motion detectors. The motion detectors we sell are very similar and use the same ultrasonic technology. The choice of which to buy...

  http://www.vernier.com/til/2996/

• What motion detector should I buy that will work with both calculators and computers/Chromebooks?

  If you need a motion detector that works with both Texas Instruments calculators as well as computers or Chromebooks, you should purchase the following: The...

  http://www.vernier.com/til/4362/

• What equipment do I need for the LEGO-EV3 Engineering Projects book?

  , contains 13 engineering challenges. Here is an outline of the Vernier and LEGO equipment required for the projects: Vernier Equipment To perform all of...

  http://www.vernier.com/til/3905/

• My power supply is making noise. Is that bad?

  Some power supplies may make a high-pitched sound when connected and in use. This is not dangerous, only a sign that the coils or capacitors...

  http://www.vernier.com/til/4354/