Shop
Search
- How do you change the battery in LabQuest 3? - Technical ...
- Sep 16, 2020 ... Follow these steps to replace a LabQuest 3 battery: Turn the unit over being careful not to set the unit on something that could scratch the ...
- https://www.vernier.com/til/8420
- Why does my brand new LabQuest 3 battery not work? - Technical ...
- Sep 16, 2020 ... Try a different adapter and/or try the adapter in a different LabQuest 3 unit to see if the problem follows the adapter or persists with ...
- https://www.vernier.com/til/8725
- What does the battery icon on my LabQuest 3 mean? - Technical ...
- Sep 16, 2020 ... Note: If you see this icon when you power your LabQuest for the first time, the protective battery tab may not have been removed.
- https://www.vernier.com/til/8410
- What do the values on the LabQuest 3 System Information Battery ...
- Sep 17, 2020 ... In the System Information dialog there is a Battery tab that provides information from the internal fuel gauge (software that monitors the ...
- https://www.vernier.com/til/8479
- LabQuest 3 FAQs - Technical Information Library
- The user manual is also available on the LabQuest 3 unit. From the Home screen, , select Experiment ... Why does my brand new LabQuest 3 battery not work?
- https://www.vernier.com/til/8364
- What LabQuest 2 accessories can I use with LabQuest 3 ...
- Sep 16, 2020 ... LabQuest 2 Charge Station (LQ2-CRG) · Vernier Lanyard (LQ-LAN)—use LabQuest 3 Lanyard (LQ3-LAN) instead · LabQuest Battery Boost 2 (LQ-BOOST2)—use ...
- https://www.vernier.com/til/8442
- LabQuest 2 Battery Troubleshooting and FAQs - Technical ...
- 1. First use of LabQuest 2 · 2. Check software version. · 3. Recalibrate battery monitor. · 4. Run a battery test. · 5. Replace the battery, if necessary.
- https://www.vernier.com/til/2741
- LabQuest Stream Battery Troubleshooting and FAQ - Technical ...
- 2. Connect LabQuest Stream to the computer using the included USB cable. The USB LED will be orange. 3. Start the computer software. Once connected to ...
- https://www.vernier.com/til/3671
- How can I keep my LabQuest 3 screen from turning off so quickly ...
- Sep 8, 2020 ... Because of this, we have implemented power saving features that help preserve battery life between charges. LabQuest has three power profile ...
- https://www.vernier.com/til/8389
- I am getting a "Battery Fault!!! Replace Battery" message on LabQuest.
- If you have LabQuest 3, see this article. This is an indication that your battery is failing and will need to be replaced soon. If the battery is generally ...
- https://www.vernier.com/til/1996
- What are the differences between the Vernier interfaces ?
- LabQuest 3 LabQuest Stream LabQuest Mini Go!Link Image Maximum Sampling Rate 100,000 samples per second 100,000 samples per second 100,000 samples per second 200 samples...
- http://www.vernier.com/til/13222/
- Original LabQuest Release Notes
- This information pertains to the original LabQuest. If you have LabQuest 2, see this article. If you have LabQuest 3, see this article.
- http://www.vernier.com/til/10034/
- What (replacement) power supply should I buy for my interface or charging station?
- Using the correct power supply will ensure the equipment is receiving the correct voltage, adequate current, and (importantly) the correct polarity. Interfaces uses the ....
- http://www.vernier.com/til/9618/
- Why does LabQuest App crash or change to the Home screen when I tap on a button or scroll a dialog on LabQuest 3?
- The most likely cause is your tap being interpreted as a swipe. When this happens, the LabQuest App goes out of view, often displaying the...
- http://www.vernier.com/til/9574/
- What does the battery icon on my original LabQuest mean?
- This information pertains to the original LabQuest. If you have LabQuest 2, see this article. If you have LabQuest 3, see this article.
- http://www.vernier.com/til/9330/
- Why does my brand new LabQuest 3 battery not work?
- This information pertains to LabQuest 3. If you have a LabQuest 2, see this article. If you have an original LabQuest, see this article. To...
- http://www.vernier.com/til/8725/
- What should I do if my LabQuest 3 gets stuck on the boot logo screen?
- This information pertains to LabQuest 3. If you have a LabQuest 2, see this article. If you have an original LabQuest, see this article. Request...
- http://www.vernier.com/til/8577/
- What do the values on the LabQuest 3 System Information Battery tab mean?
- This information pertains to LabQuest 3. If you have a LabQuest 2, see this article. The original LabQuest does not support this functionality. In the...
- http://www.vernier.com/til/8479/
- Can I use an AC adapter from an older LabQuest with my LabQuest 3?
- The short answer is no. While power adapters that came with older LabQuest units can power LabQuest 3, they cannot provide enough current to also...
- http://www.vernier.com/til/8431/
- How do you change the battery in LabQuest 3?
- This information pertains to LabQuest 3. If you have a LabQuest 2, see this article. If you have an original LabQuest, see this article. Follow...
- http://www.vernier.com/til/8420/
- What does the battery icon on my LabQuest 3 mean?
- This information pertains to LabQuest 3. If you have a LabQuest 2, see this article. If you have an original LabQuest, see this article. ...
- http://www.vernier.com/til/8410/
- How can I keep my LabQuest 3 screen from turning off so quickly?
- The LabQuest 3 screen by far consumes the most power on the device. Because of this, we have implemented power saving features that help preserve...
- http://www.vernier.com/til/8389/
- How does LabQuest 3 compare to LabQuest 2?
- Below is a list of differences between LabQuest 3 and LabQuest 2. Features that are otherwise the same are not mentioned. Hardware NEW Capacitive touch...
- http://www.vernier.com/til/8373/
- LabQuest 3 FAQs
- This information pertains to LabQuest 3. If you have a LabQuest 2, see this article. If you have an original LabQuest, see this article. User...
- http://www.vernier.com/til/8364/
- My school is moving to iPad. Will the probeware I already own work with an iPad?
- As schools move to new technology platforms, many teachers have asked us for advice on how to make the most cost effective use of probeware...
- http://www.vernier.com/til/7711/
- Connection Instructions for Spectrometers
- Learn how to connect Vernier spectrometers to your data-collection platform. Select the appropriate tab to view detailed connection instructions for your specific platform. Related Links...
- http://www.vernier.com/til/5939/
- Go Direct Blood Pressure Troubleshooting and FAQs
- Specifications and User Guide TROUBLESHOOTING Primary Test: To confirm that the sensor works correctly, follow the steps below. 1. Launch Graphical Analysis, Graphical Analysis Pro,...
- http://www.vernier.com/til/4454/
- Differential Voltage Probe Troubleshooting and FAQs
- Specifications and User Guide TROUBLESHOOTINGPrimary Test: Are the leads properly and securely connected? The probe is designed to be used like voltmeter leads. It should...
- http://www.vernier.com/til/1428/
- LabQuest blue power-button LED is on, but the screen is black.
- This information pertains to the original LabQuest. If you have LabQuest 2 or LabQuest 3, see this article. There are a few possible causes to...
- http://www.vernier.com/til/1779/
- Bluetooth Help and Troubleshooting Tips related to the Wireless Dynamics Sensor System (WDSS)
- INTRODUCTION TO BLUETOOTH WITH THE WIRELESS DYNAMICS SENSOR SYSTEM (WDSS) The Vernier Wireless Dynamics Sensor System (WDSS) transfers data to a computer using Bluetooth, a...
- http://www.vernier.com/til/4429/
- My school is moving to Chromebooks. Will the probeware I already own work with a Chromebook?
- As schools move to new technology platforms, many teachers have asked us for advice on how to make the most cost effective use of probeware...
- http://www.vernier.com/til/2871/
- Will I get interference when I put two sensors in the same solution?
- It will depend on several things. The easiest way to ensure no interference is to use our Go Direct water quality sensors via Bluetooth. If...
- http://www.vernier.com/til/638/
- Go Direct SpectroVis Plus Troubleshooting and FAQs
- Please read the user manual for general usage: Specifications and User Guide TROUBLESHOOTING -Primary Test: Are you using Logger Pro v3.14, LabQuest App v2.7.2, or...
- http://www.vernier.com/til/3847/
- My Go Direct SpectroVis Plus is not identified or is not responding in software.
- When a is connected via USB, if the indicator lights on the front of the unit are not as expected and the spectrometer does not...
- http://www.vernier.com/til/4091/
- Why are my voltage readings inaccurate when I measure half cells or batteries?
- To get the most accurate readings from the Voltage Probe, when measuring the half cell potential in a chemistry experiment (such as Lab 28 from...
- http://www.vernier.com/til/2388/
- Which motion detector should I buy? What are the differences between them?
- We sell multiple motion detectors. The motion detectors we sell are very similar and use the same ultrasonic technology. The choice of which to buy...
- http://www.vernier.com/til/2996/
- LabQuest 2 Release Notes
- This information pertains to LabQuest 2. If you have LabQuest 3, see this article. If you have an original LabQuest, see this article.
- http://www.vernier.com/til/2803/
- LabQuest 2 FAQs
- This information pertains to LabQuest 2. If you have a LabQuest 3, see this article. If you have an original LabQuest, see this article. The...
- http://www.vernier.com/til/2694/
- Is it OK to use Go Wireless or Go Direct sensors in a vacuum?
- It is not recommended that these products be used in a vacuum or very low pressure environment such as that created by a classroom-grade vacuum...
- http://www.vernier.com/til/3775/
- I am having trouble getting my original LabQuest to turn on/start up. (flowchart)
- This information pertains to the original LabQuest. If you have LabQuest 2, see this article. If you have LabQuest 3, see this article. Normally, the...
- http://www.vernier.com/til/4245/
- Go Wireless Temp - Data Collection Details
- Data Collection with Go Wireless Temp FAQs Q: What are the steps to start data collection with a Go Wireless Temp? A: Follow the instructions...
- http://www.vernier.com/til/3135/
- Original LabQuest Troubleshooting and FAQs (Full List)
- This information pertains to the original LabQuest. If you have LabQuest 2, see this article. If you have LabQuest 3, see this article. User manual:...
- http://www.vernier.com/til/1688/
- LabQuest does not respond and the screen and power light are black.
- This information pertains to the original LabQuest. If you have LabQuest 2 or LabQuest 3, see this article. If your LabQuest is not powering on...
- http://www.vernier.com/til/1880/
- How do I replace the AC adapter port on an original LabQuest?
- The preferred way to replace the AC adapter port on an original LabQuest is to replace the UAP (USB, Audio, Power) circuit board in the...
- http://www.vernier.com/til/4220/
- How can I tell if my LabQuest power adapter is good?
- Here are several ways to determine if you LabQuest power adapter is functioning. 1) Check to see that the LabQuest battery icon shows that the...
- http://www.vernier.com/til/4247/
- I have trouble getting my LabQuest 2 to turn on/start up. (flowchart)
- This information pertains to LabQuest 2. If you have an original LabQuest, see this article.If you have a LabQuest 3, see this article. Normally, LabQuest...
- http://www.vernier.com/til/3355/
- Updating my original LabQuest fails trying to install the LabQuest Battery Driver (v1.2)
- When updating an original LabQuest, the update can fail when trying to update the LabQuest Battery Driver software. This typically happens when the battery in...
- http://www.vernier.com/til/4242/
- My original LabQuest is displaying white text on a black screen and will not boot.
- This information pertains to the original LabQuest. If you have LabQuest 2, see this article. A LabQuest that is showing white text on a black...
- http://www.vernier.com/til/4246/
- My brand new LabQuest 2 battery doesn't work.
- This information pertains to LabQuest 2. If you have a LabQuest 3, see this article. If you have an original LabQuest, see this article. To...
- http://www.vernier.com/til/2692/
- How do I perform a hard reset on my original LabQuest unit?
- Note: Do not use a Hard Reset except as a last resort such as when both the screen and hard keys are not responding. This...
- http://www.vernier.com/til/2433/
- How do I remove or replace an original LabQuest battery?
- This information pertains to the original LabQuest. If you have LabQuest 2, see this article. If you have LabQuest 3, see this article. 1. Disconnect...
- http://www.vernier.com/til/2189/
- I am getting a "Battery Fault!!! Replace Battery" message on LabQuest.
- This information pertains to the original LabQuest. If you have LabQuest 2, see this article. If you have LabQuest 3, see this article. This is...
- http://www.vernier.com/til/1996/
- My LabQuest 2 battery indicator is red, what does that mean?
- A red battery with lightening bolt icon on a LabQuest 2 means that the battery has failed an internal test but the unit is running...
- http://www.vernier.com/til/2987/
- Digital Control Unit (DCU) Troubleshooting and FAQs
- Specifications and User Guide There have been three Digital Control Unit (DCU) models over the years. The current model is black, rectangular, and has a...
- http://www.vernier.com/til/2101/
- Go Direct Energy Sensor Troubleshooting and FAQs
- Specifications and User Guide TROUBLESHOOTING Primary Test: Make sure the load switch is in the “Internal 30 ” setting Connect the sensor to a AA...
- http://www.vernier.com/til/4123/
- How should I store Vernier products during the summer?
- Are you packing up your Vernier equipment for storage over the summer? Here are some tips to ensure proper storage over a long break. Go...
- http://www.vernier.com/til/3686/
- What power supplies can I use with mBot?
- mBot ships with both a 3.7-V rechargeable lithium battery and a 4-AA battery holder. In most cases, these are the best power supplies to use...
- http://www.vernier.com/til/4108/
- My LabQuest 2 locks up or is not identified when connected to a SpectroVis Plus.
- In rare cases, a SpectroVis Plus or Go Direct SpectroVis Plus may lock up when used on a LabQuest 2, it may not be recognized,...
- http://www.vernier.com/til/2922/
- LabQuest 2 screen is solid white, does not respond.
- If the LabQuest 2 screen is a solid white, please try the following: 1. Try to turn the unit off by holding the power button...
- http://www.vernier.com/til/4168/
- Go Direct Sensor Cart Troubleshooting and FAQs
- Specifications and User Guide for and The Go Direct Sensor Cart is a dynamics cart with in-built position, force and acceleration sensors. Each dynamics cart...
- http://www.vernier.com/til/4131/
- My Go Direct Colorimeter battery indicator light stays orange despite hours of charging.
- This is a known issue and our engineers are working on possible fixes for it. The units are fully charged and should work fine –...
- http://www.vernier.com/til/11080/
- I'm having trouble connecting my Android device to a LabQuest Stream.
- To connect the Graphical Analysis app running on an Android device to a LabQuest Stream interface, do the following: Turn on your LabQuest Stream interface....
- http://www.vernier.com/til/10885/
- How do I get my own labs on my LabQuest 3?
- This information pertains to LabQuest 3. If you have an original LabQuest or LabQuest 2, see this article. Follow these steps to save your lab...
- http://www.vernier.com/til/8753/
- How do I set up LabQuest 3 to email data with a Gmail account?
- This information pertains to LabQuest 3. If you have a LabQuest 2, see this article. The original LabQuest does not support this feature. Related Links[til...
- http://www.vernier.com/til/8735/
- LabQuest 3 Release Notes
- This information pertains to LabQuest 3. If you have LabQuest 2, see this article. If you have an original LabQuest, see this article.
- http://www.vernier.com/til/8401/
- Go Direct Mini GC Troubleshooting and FAQs
- These specifications are for the Specifications and User Guide If you have the original Mini GC, the specifications are listed here: Specifications and User Guide...
- http://www.vernier.com/til/7281/
- How do you press the Keep button, during data collection, using Talking LabQuest 2?
- After talking with the people at Independence Science, we do not think there is a way to activate the Keep button, during Events with Entry...
- http://www.vernier.com/til/6523/
- What sensor data-collection app is used with TI-83/84 Plus graphing calculators?
- Vernier EasyData is the easy-to-use, data-collection program used on TI-83 Plus and TI-84 Plus graphing calculators. Vernier EasyData® App EasyData brings a level of simplicity...
- http://www.vernier.com/til/5078/
- My LabQuest 2 asks for a Linux login. What should I do?
- If this is what you see (in white or pale blue font) when you are updating your LabQuest 2 or turning it on: OpenedHand Linux...
- http://www.vernier.com/til/3051/
- LabQuest 2.6.2, 2.6.1 and 2.6 Release Notes
- LabQuest 2.6.2 • Improved system stability with networking LabQuest 2.6.1 • Improved system stability after reboot LabQuest 2.6 New Sensor Support • Platinum-Cell Conductivity Probe...
- http://www.vernier.com/til/3521/
- LabQuest 2.5.3 and 2.5 Release Notes
- LabQuest 2.5.3 • Addressed an issue related to the data acquisition (DAQ) software LabQuest 2.5 New Sensor Support • Vernier Structures & Materials Tester •...
- http://www.vernier.com/til/3373/
- Go Wireless Sensors - LabQuest Support Details
- LabQuest support for Go Wireless sensors FAQs Q: What LabQuest units can collect Go Wireless sensor data? A: LabQuest 2 and LabQuest 3. However, some...
- http://www.vernier.com/til/3134/
- How do I know if my LabQuest will work with Go Direct Sensors and Go Wireless devices?
- Only the , connected via USB can be used with the original LabQuest. All other Go Direct sensors are not supported. All models of LabQuest...
- http://www.vernier.com/til/3085/
- Are your apps supported in macOS 10.15 Catalina?
- macOS® 10.15 (also called Catalina) was released October 7, 2019. Logger Pro 3.16 is fully supported with the exception of video capture. Video analysis is...
- http://www.vernier.com/til/4441/
- Logger Pro installer has trouble during the extracting files step
- Problem: I am trying to install Logger Pro or Logger Lite and I get one of the following errors during setup initialization: – Error extracting...
- http://www.vernier.com/til/3174/
- How do Logger Pro, Graphical Analysis, LabQuest app, and Vernier Video Analysis calculate velocity and acceleration?
- Logger Pro, Graphical Analysis, LabQuest App, and Vernier Video Analysis all determine velocity and acceleration from position values using a numerical derivative calculation. Data used...
- http://www.vernier.com/til/1011/
- How do I tell which model Go!Link I have?
- The Go!Link originally came out in 2004. As time went on some of the components we were using in the original design were no longer...
- http://www.vernier.com/til/4389/
- What is the timing precision of photogate measurements?
- For Blocked-to-Blocked and Unblocked-to-Unblocked transitionsVernier photogates have an electronic timing resolution of 1 microsecond. You will, however, typically get measurements with as much as +/-25...
- http://www.vernier.com/til/1467/
- Can't alter default 1.0 m scale factor in Video Physics on iOS/iPadOS 13.
- iOS/iPadOS 13 broke the scaling routine in some versions of Video Physics. You could not alter the default 1.0 m scale factor. In the Origin...
- http://www.vernier.com/til/4485/
- How do I update firmware on Go Direct sensors?
- Go Direct sensors running older firmware need to be updated. While sensors with older firmware will work with Graphical Analysis and LabQuest App, there likely...
- http://www.vernier.com/til/4013/
- macOS is warning me that Logger Pro is not 64 bit and therefore won't run on 10.15 Catalina
- If you are specifically seeing messages about Logger Pro not being 64 bit, that means you are running an older version of Logger Pro, and...
- http://www.vernier.com/til/4495/
- macOS gives a message on launch of Logger Pro that "Logger Pro has not been optimized for your Mac"
- Logger Pro 3.15 and earlier will generate an error message on computers running macOS 10.14.4 and later. The full text of the error message is...
- http://www.vernier.com/til/4386/
- Is there a user guide for Logger Pro 3?
- There are several ways to get help using Logger Pro 3. First, on our Product Manuals page, there is a quick start guide: http://www2.vernier.com/manuals/LP3QuickRefManual.pdf In...
- http://www.vernier.com/til/1207/
- Logger Pro crashes on launch on my Mac, but it used to work.
- This is most likely caused by a corrupt preferences file. The location of this file is: ~/Library/Preferences/com.vernier.loggerpro.plist Follow these steps to reset the preferences file:...
- http://www.vernier.com/til/4484/
- Logger Pro Troubleshooting and FAQs
- General Troubleshooting Tips Try these first. Many issues can be solved in a few simple steps: [til 2094] System Requirements [til 1579] [til 3617] [til...
- http://www.vernier.com/til/2089/
- Logger Pro installer warns that Windows can't verify the publisher of this driver software.
- This is only an issue with older versions of Logger Pro and Logger Lite. Logger Pro version 3.14.1 fixes this issue. Logger Lite 1.9.3 fixes...
- http://www.vernier.com/til/4033/
- Where can I get VPAT forms for Vernier products?
- Some school districts require the submission of the Voluntary Product Accessibility Template form for certain software products. Completed VPAT Forms for the Vernier products listed...
- http://www.vernier.com/til/3527/
- LabQuest 2 or LabQuest 3 Wi-Fi username field is wrong and grayed out
- If you have a LabQuest 2 that was connected to a WPA2 Enterprise network where you enter a username/password, and either you mis-typed the username...
- http://www.vernier.com/til/4473/
- Networking for LabQuest 2 and LabQuest 3—FAQ and Troubleshooting
- This information pertains to LabQuest 2 and LabQuest 3. If you have an original LabQuest, see this article. INITIAL SETUP [til 2725] [til 2726] [til...
- http://www.vernier.com/til/2669/
- Go Direct Nitrate Ion-Selective Electrode Troubleshooting and FAQs
- Specifications and User Guide TROUBLESHOOTING -Primary Test: Check the readings in the standards. The high should be around 100 mg/L. The low should be around...
- http://www.vernier.com/til/4348/
- What is the thread on the bumpers and hooks for Vernier Force Sensors?
- This article refers to the following sensors: The hooks and bumpers used with our various force sensors have a 6-32 thread. You can usually buy...
- http://www.vernier.com/til/1862/
- My LabQuest unit got very wet, and now it won't turn on. What can I do?
- LabQuest is designed to be splash-resistant, but is not waterproof. If the unit is immersed or gets very wet, permanent damage can result. Such damage...
- http://www.vernier.com/til/2425/
- Why is Logger Pro/Logger Lite giving an error about mfc140u.dll or 0xc000007b?
- This is fixed in Logger Pro version 3.15, if you are running an older version of Logger Pro you should update to version 3.15 here:...
- http://www.vernier.com/til/4047/
- What are the differences between Graphical Analysis Pro app and Logger Pro?
- There are two primary data collection applications published by Vernier: Logger Pro and Graphical Analysis Pro. Logger Pro, a mature and powerful data collection and analysis application,...
- http://www.vernier.com/til/3455/
- Do you have silent installers for software other than Logger Pro and Graphical Analysis App?
- We offer a silent installer for Logger Pro and Graphical Analysis App. See: [til 1681] [til 4199] We recommend using our silent installer for Logger...
- http://www.vernier.com/til/2444/
- Is the Go Direct 3-axis Magnetic Field Sensor submersible?
- This article refers to the For information about the , see [til 1420] The wand portion of Go Direct 3-Axis Magnetic Field is water resistant...
- http://www.vernier.com/til/3925/
- How do I use Vernier USB products with a computer or Chromebook having only USB-C ports?
- Some computers and Chromebooks only have USB-C or Thunderbolt 3 ports and no USB-A ports. Such devices include all but one of the Apple MacBook...
- http://www.vernier.com/til/3822/
- How do you calibrate the GDX-3MG sensor?
- This article refers to the The GDX-3MG sensor uses two three-axis magnetic-field sensor ICs which are placed at the end of the plastic rod. The...
- http://www.vernier.com/til/4388/
- How do I deter student access to various network settings in LabQuest 2 or LabQuest 3?
- There is a user preference in LabQuest 2 and LabQuest 3 to deter student access to naming, network, and connections settings. This is not a...
- http://www.vernier.com/til/3004/
- How can I move data collected on a LabQuest to Graphical Analysis app on a Chromebook if I can't use Wi-Fi?
- Data can be moved most easily from LabQuest 2 or LabQuest 3 to a Chromebook via Wi-Fi. Instructions can be found in [til 3467]. However,...
- http://www.vernier.com/til/4422/
- What is the shelf life of a new LabQuest replacement battery?
- This is really a difficult question to answer and will vary battery to battery. We can’t provide a specific shelf life for the batteries but...
- http://www.vernier.com/til/4421/
- Can I use Vernier sensors with LEGO hardware and software?
- There are a few ways in which to use Vernier sensors with LEGO hardware and software. But those connection options are fairly limited, as outlined...
- http://www.vernier.com/til/4380/
- Can I do data logging using MINDSTORMS EV3 software?
- Yes. There are several different options for logging data with the EV3 using MINDSTORMS software. Here are the various data logging options: 1. Live Data...
- http://www.vernier.com/til/3569/
- Which calculators that Vernier sells have TI SmartView emulator software?
- The following calculators have TI SmartView emulator software available from Texas Instruments: TI-83 Plus, TI-84 Plus (all models)Use TI-Nspire and TI-Nspire CAS Handhelds (all models)...
- http://www.vernier.com/til/1928/
- Does the TI-Nspire CX wireless adapter only work with the TI-Navigator system from which it came?
- No. The CX wireless Wi-Fi adapters are designed to work with any TI-Navigator system. While the TI-Navigator software will remember any network adapter that has...
- http://www.vernier.com/til/4405/
- LEGO® Mindstorms® EV3 Troubleshooting and FAQs
- LEGO® Mindstorms® EV3 units are able to work with Vernier sensors using our LEGO Sensor Adapter for EV3 and NXT (order code: BTA-NXT, $39) and...
- http://www.vernier.com/til/3339/
LabQuest® 3 Battery
SAVE/SHARE YOUR CART